Boss RC-50 Owner's Manual page 78

Controlling Operations from an External MIDI Device
fig.08-160d
3.
After using PARAMETER [
"SYS" or "PAT" in the upper row of the display, you can then
rotate the PATCH/VALUE dial to select either the system
settings or patch settings as the settings to be used.
Available Settings Description
The system settings are used.
~~: SYS
The patch settings are used.
~~: PAT
4.
Press PARAMETER [
lower row of the display, then use the PATCH/VALUE dial to
set how you want the Control Change to be used.
5.
Repeat Steps 2–4 as needed.
6.
Press [EXIT] to return to the Play screen.
* When selecting patch pedal settings, use the procedure described in
"Saving by Patch Numbers (Patch Write)" (p. 54) when saving the
settings.
CC#1, CC#7
Available Settings Description
No operation
OFF
Controls the volume level of Phrase 1
PHRASE 1 LEVEL
Controls the volume level of Phrase 2
PHRASE 2 LEVEL
Controls the volume level of Phrase 3
PHRASE 3 LEVEL
Controls the panning of Phrase 1
PHRASE 1 PAN
Controls the panning of Phrase 2
PHRASE 2 PAN
Controls the panning of Phrase 3
PHRASE 3 PAN
Controls the volume level of the current
CURRENT LEVEL
phrase
Controls the panning of the current phrase
CURRENT PAN
Controls the volume level of the guide
GUIDE LEVEL
sound
Controls the patch's volume level
PATCH LEVEL
Controls the patch tempo
PATCH TEMPO
78
] [ ] to move the cursor to
] [ ] to move the cursor to the
CC#80
Available Settings Description
Applies to both system settings and patch settings
No operation
OFF
Starts and stops playback of all Phrases 1–3
ALL START/STOP
simultaneously
Starts and stops playback of Phrase 1 (*)
PHRASE 1 PLY/STP
Starts and stops playback of Phrase 2 (*)
PHRASE 2 PLY/STP
Starts and stops playback of Phrase 3 (*)
PHRASE 3 PLY/STP
Starts playback of Phrase 1 (*)
PHRASE 1 PLAY
Starts playback of Phrase 2 (*)
PHRASE 2 PLAY
Starts playback of Phrase 3 (*)
PHRASE 3 PLAY
(*)
• Playback does not start if the phrase is blank.
• Playback begins immediately, with no playback count-in sound
played.
Stops playback of Phrase 1
PHRASE 1 STOP
Stops playback of Phrase 2
PHRASE 2 STOP
Stops playback of Phrase 3
PHRASE 3 STOP
Turns reverse playback of Phrase 1 on and
PHRASE 1 REVERSE
off
Turns reverse playback of Phrase 2 on and
PHRASE 2 REVERSE
off
Turns reverse playback of Phrase 3 on and
PHRASE 3 REVERSE
off
Switches Loop and One Shot playback for
PHRASE 1 ONESHOT
Phrase 1
Switches Loop and One Shot playback for
PHRASE 2 ONESHOT
Phrase 2
Switches Loop and One Shot playback for
PHRASE 3 ONESHOT
Phrase 3
Clears Phrase 1 (*)
PHRASE 1 CLEAR
Clears Phrase 2 (*)
PHRASE 2 CLEAR
Clears Phrase 3 (*)
PHRASE 3 CLEAR
(*) Phrases cannot be cleared if the current phrase is being
recorded/overdubbed.
Turns reverse playback of the current
CURRENT REVERSE
phrase on and off
Switches Loop and One Shot playback for
CURRENT ONE SHOT
the current phrase
Clears the current phrase (*)
CURRENT CLEAR
(*) Phrases cannot be cleared if the current phrase is being
recorded/overdubbed.
Undo/Redo
UNDO/REDO
PATCH TEMPO (TAP) Tap input for patch tempo
Switches Overdubbing mode switching
sequence to OVERDUB → REPLACE →
OVERDUB MODE INC
MOMENTARY PUNCH-IN
GUIDE START/STOP Starts and stops the guide
Switches the Play mode (Single/Multi)
PLAY MODE
* All phrases stop when the mode is switched
during recording, playback, or overdubbing.
Applies to system settings only
PATCH NUMBER INC Switches to the next higher patch number
PATCH NUMBER DEC Switches to the next lower patch number
Writes the patch
PATCH WRITE
* When pressing a pedal twice, Patch Write is
executed.