Error Messages - Roland Fantom XR Owner's Manual

Error Messages

If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear. Refer to the
explanation for the error message that appears, and take the appropriate action.
Message
Cannot Edit Preset Sample!
Cannot Edit GM Patch
Cannot Write GM Patch
Card Not Ready!
Empty Sample!
File Name Duplicate
Illegal File!
Memory Damaged!
Memory Full!
MIDI Offline!
No More Sample Numbers!
Permission Denied!
Sample Length Too Short!
Sample Memory Full!
Too Many Sample Selected!
Unformatted!
218
Meaning
This is a preset sample, and therefore cannot be edited.
This is a GM patch, and therefore cannot be edited.
This is a GM patch, and therefore cannot be saved.
A memory card is not inserted in the slot.
The sample contains no data.
A file with the same name already exists.
The Fantom-XR cannot use this file.
The contents of memory may have been damaged.
Saving is not possible because there is insufficient space
in the user area or memory card.
There is a problem with the MIDI cable connection.
The sample cannot be divided any further.
Since fewer than 256 consecutive sample numbers are
vacant, no further sampling is possible.
The file is protected.
The sample is too short, and cannot be edited correctly.
Since there is insufficient sample memory, no further
sampling or sample editing is possible.
The operation cannot be executed, since marks are as-
signed to more than one sample.
The memory card is in an unsupported format.
Action
—
—
—
Insert a memory card into the slot.
Select a sample that contains data.
Delete the file bearing the same name from the disk,
and if overwriting and saving the data, merely save
the file. If you do not want to delete the file with the
same name from the disk, either save the file with a
different name.
—
Please perform the Factory Reset operation.
If this does not resolve the problem, please contact
your dealer or the nearest Roland Service Center.
Delete unneeded data.
Check that the MIDI cable has not been disconnect-
ed or broken.
Erase unneeded samples in order to allocate 256 or
more consecutive sample numbers.
—
If the sample is extremely short, editing may not
produce the desired result.
Erase unneeded samples.
Either clear the marks, or mark only one sample.
Format the memory card.