System Sampling; System Memory Info; System Srx Info; System Version Info - Roland Fantom XR Owner's Manual

System Sampling

Parameter
Default File Type
Pre Sample Time
Trigger Level
Gap Time
Input Select
Trimming Switch

System Memory Info

Displays the amount of memory installed.

System SRX Info

Displays the name of the wave expansion board that is installed.

System Version Info

Displays the version of the Fantom-XR.
Settings Common to All Modes (System Function)
Value Description
WAV, AIFF Specifies the file format used when saving a sample.
0–1000 ms The length of sound preceding the moment at which sampling was manually
or automatically initiated that will be captured in the sample. This lets you
prevent the attack portion of the sound from being omitted from the sample.
0–7 Volume level at which sampling will begin when Auto Trig is ON
A setting of 0 is the minimum.
500, 1000, 1500, 2000 Length of silence at which the sample will be divided
ms
Whenever there is a silent region longer than the specified time, the sample will be
divided at that point, and the next sample number will be assigned to the sound that
follows. This parameter is valid only when you are using Auto Divide Sampling.
DIGITAL IN, Input source of the external input sound
LINE-L/R,
DIGITAL IN:
LINE-L,
LINE-L/R:
MICROPHONE
LINE-L:
MICROPHONE:
OFF, ON If this is turned on, the Start point and End point settings will be
automatically adjusted after sampling is performed, so any silent portions at
the beginning or end of the sampled sound are excluded.
DIGITAL INPUT jack
INPUT jacks L/R (stereo)
INPUT jack L (mono)
INPUT jack (mono, mic level)
161