Verifying The Version; Data Backup And Restore Operations; Performing A Factory Reset; Updating The System - Roland JD-XA Service Notes

Jul. 2015

Verifying the Version

1.
Press MENU.
2.
Press to select VERSION INFO.
3.
Press Enter.
The system version is displayed.
4.
Press Exit several times to return to the initial screen.
Data Backup and Restore
Operations
Formatting a USB Memory Device
1.
Connect a USB memory device to the USB MEMORY connector.
2.
Press MENU.
3.
Press or to select UTILITY, then press Enter.
4.
Press to select USB MEM FORMAT, then press Enter.
A confirmation message is displayed.
5.
To execute formatting, press Enter. To cancel it, press Exit.
Pressing Enter executes formatting. When the message Completed!
appears, formatting has finished.
6.
Detach the USB memory device.
Data Backup Operations
Items Required
• USB memory device (recommended: M-UF2G)
Procedure
1.
Format a USB memory device—refer to Formatting a USB Memory
Device (p. 23).
2.
Connect the formatted USB memory device to the USB MEMORY
connector.
3.
Press MENU.
4.
Press or to select UTILITY, then press Enter.
5.
Press to select BACKUP, then press Enter.
A screen for inputting the file name appears.
6.
If necessary, using +, -, or
7.
To execute the backup operation, press Enter. To cancel it, press Exit.
A confirmation message is displayed.
8.
To execute the backup operation, press Enter. To cancel it, press Exit.
Pressing Enter executes the backup operation. When the message
Completed! appears, the backup operation has finished.
9.
Detach the USB memory device.
, change the file name.
Data Restore Operations
1.
Connect the USB memory device containing the backed-up user data to
the USB MEMORY connector.
2.
Press MENU.
3.
Press or to select UTILITY, then press Enter.
4.
Press or to select RESTORE, then press Enter.
A screen for selecting the file to restore appears.
5.
Using + or -, select the file to restore.
6.
To execute the restore operation, press Enter. To cancel it, press Exit.
A confirmation message is displayed.
7.
To execute the restore operation, press Enter. To cancel it, press Exit.
Pressing Enter executes the restore operation. When the message
Completed! Turn off power. appears, the restore operation has finished.
8.
Detach the USB memory device and reset the power.

Performing a Factory Reset

1.
Press MENU.
2.
Press or to select UTILITY, then press Enter.
3.
Press or to select FACTORY RESET, then press Enter.
A confirmation message is displayed.
4.
To execute the factory reset, press Enter. To cancel it, press Exit.
Pressing Enter executes the factory reset. When the message Completed!
Turn off power. appears, the factory reset has finished.
5.
Reset the power.

Updating the System

Items Required
• Computer
• USB memory device (recommended: M-UF2G)
• Update file (JDXA_UPA.BIN) (obtained via Service Net)
Procedure
1.
Format a USB memory device using the FAT32 file system.
2.
Copy the update file to the root folder of the USB memory device.
3.
While the power to the unit is switched off, insert the USB memory device
just described into the USB MEMORY connector.
4.
Hold down TAP and switch on the power.
Continue to hold down TAP until Update appears on the screen.
The update starts.
The update takes approximately 1 minute to complete. When Finished.
appears, the update has finished.
5.
Detach the USB memory device and switch off the power.
JD-XA
23