Initializing A Patch Or Tone - Roland V-Synth GT Quick Start Manual

04

Initializing a patch or tone

Initializing means to return the currently selected patch or tone to a standard set of values. If you
want to create a patch or tone from scratch, rather than starting from an existing patch or tone,
you can execute the Initialize operation.
*
Initialize will aff ect only the currently selected patch or tone; it does not rewrite patches or
tones saved in internal memory.
*
If you want to return all settings to the factory-set condition, execute Factory Reset.
For details, refer to "Owner's Manual."
1.
Select the patch or tone that you want to initialize.
2.
In the upper right of the screen, touch <MENU>.
3.
In the pulldown menu, touch <Patch Init> or <Tone Init>.
4.
Touch <OK> to execute the Initialize operation.
A pulldown menu will appear.
The settings will be initialized, and you'll
return to the previous screen.
51