Performing With Vocal Designer - Roland V-Synth GT Quick Start Manual

03

Performing with Vocal Designer

You'll need a mic in order to perform using Vocal Designer. Connect a mic before you continue.
Setup Setup
1.
Connect your mic to the "MIC IN jack" as shown in the illustration.
2.
Press the [SETTING] button.
Press the [SETTING] button located below the panel INPUT knob to access the Audio Input Set-
tings screen.
3.
Vocalize into the mic.
4.
Turn the INPUT knob to adjust the mic input level so that the Peak indi-
cator does not light when the loudest input occurs.
5.
Touch <EXIT> to return to the Patch Play screen.
34
*
After adjusting the mic input level, you will generally
leave it fi xed. If you want to adjust the volume of Vocal
Designer, use the VOLUME knob to make adjustments.
ignal level of the
at Peak does not light.