Roland V-Synth GT Quick Start Manual page 15

2 2 . Edit area Edit area
You'll use this area mainly to edit tones.
Parameters of the selected tone can also be directly selected from the panel.
STRUCTURE
You can change the way in which the
V-Synth GT sound generator's elements
(sections) are connected. The way in which
the sections are connected is called the
"structure, " and you can choose one of fi ve
structures.
KEY MODE
Here you can turn the lower tone and upper tone
on/off .
If the [SELECT] button is lit, these
buttons will operate as the select
buttons for the lower tone and
upper tone.
In the illustration shown at
left, the upper tone is selected,
meaning that you can use the
buttons and knobs of the edit
area to edit the upper tone.
Section on/off buttons
Here you can directly turn on/off each sec-
tion in the structure. While you're editing,
this gives you a convenient way to hear
what each section is actually doing.
ENV (envelope)
Here you can control the TVA section.
If the SCREEN indicator is lit, you can edit
the envelope directly in the screen.
15