KI All Terrain ATSW29 Assembly Instructions

April, 2002
KI
1330 Bellevue Street
P.O. Box 8100
Green Bay, Wisconsin 54308-8100
www.ki.com
TEL (920) 468-8100
FAX (920) 468-0280
Assembly Instructions
All Terrain ® Mobile Furniture
Fixed-Height and Pin-Height or Pneumatic-Height Adjustable Tables with X-Bases
Pneumatic-Height
or Fixed-Height Adjustable
ATSW29/
ATSL2126/
Pin-Height Adjustable
ATDE30/
ATDE24/
Assemble units as described herein only. To do otherwise may result in instability. All screws, nuts and bolts must be tightened and
checked periodically after assembly. Failure to assemble properly, or to secure parts may result in assembly failure and
injury. Illustrations and specifications are based on current product information at the time of this printing.
ATRC2424/, ATRC2724/, ATRC2730/,
ATRC3024/, ATRC330/
ATRN30/, ATRN36/, TR25FX/,
TR3FX/, TR35FX/, TR4FX/
ATDE27/
ATSL2526/
Tools Required:
#2 Phillips screwdriver
3 / " open end wrench
4
(for tables with casters)
Hardware Included:
(4) 1 / -20 x 3 / " Phillips pan-head screw
4 4
with nylon patch
4 total of one of the following:
locking casters (46.5147)
non-locking casters (46.5146)
glides (10.3000.BLWH)
1. To avoid scratching the tabletop,
place it face down on a soft protective
material. Refer to the top and base
packaging labels to identify the table
model number. Identify applicable
table illustration:
2. Unpackage appropriate table base
and refer to the illustration to left for
proper base/leg orientation.
Note: For pneumatic-height adjustment
bases, also refer to the illustration
for activation lever orientation. Set
the base in place on the underside
of the worksurface aligning
attachment holes with threaded
inserts in the worksurface tops
as shown.
Note: Front of tables are at the top
of illustration.