KI Altus Task Seating Disassembly Instructions

Disassembly Instructions
Altus™ and Allude™ Task Seating
Material Type:
A . Steel
All fasteners not explicitly tagged
are Material Type A: Steel
Required
Tools
Gloves
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
B. Plastic C. Foam
B
Safety Glasses
D. Aluminum
C
B
A
B D
Philips Screwdriver Rubber Mallet
Procedure:
1. Invert the chair and undo the Velcro holding the seat
cushion to the seat pan. Pull up on the cushion to remove
the cushion.
2. Invert the chair and gently tap on the bottom of the steel
height adjustment cylinder while lifting the star base.
WARNING: CONTENTS UNDER PRESSURE!
REMOVE WITH CATUTION.
General Notes:
1. Disassembly time: 10-15 minutes
2. This procedure assumes basic familiarity with hand tools and
furniture terminology: no specialized training is required
3. All materials removed and disassembled shall be sorted and
segregated with like materials and disposed of or recycled
according to recycling availability or waste acceptance
4. For items to be recycled, refer to KI's End of Life Recycling
Matrix and KI's End of Life Recovery Options Matrix, available
at www.ki.com
Allen Wrench
©2013 Krueger International, Inc. All Rights Reserved · P0033-0088 Rev. 0 Page 1 of 2