Installing The Postscript 3 Printer Driver (Windows Nt 4.0 - Ipp) - Ricoh CL4000DN Software Manual

Preparing for Printing
Only printers that respond to a broadcast from the computer are displayed. To
use a printer not listed here, click [Specify Address], and then enter the Net-
BEUI address. The NetBEUI address can be checked with the configuration
page. For information about printing a configuration page, see
a Configuration
"\\RNPxxxx\xxx" on the configuration page. Enter the printer's network path in
the format of "%%Computer name\Share name". Use "%%" instead of "\\" at
the beginning.
You cannot print using printers beyond routers.
J
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
K
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
L
Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
M
Restart the computer to complete installation.
❒ A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.

Installing the PostScript 3 Printer Driver (Windows NT 4.0 - IPP)

❒ Installing this printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Page". The NetBEUI address appears in the format of
p.131 "Printing
35