RAZER HAMMERHEAD TRUE WIRELESS - Earbuds Manual

WHAT'S INSIDE

WHAT'S NEEDED

Devices with Bluetooth audio capability

LET'S GET YOU COVERED

You've got a great device in your hands complete with a 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com

GETTING STARTED

CHARGING YOUR RAZER HAMMERHEAD TRUE WIRELESS

For first time use, connect the charging case to a USB port using the charging cable without removing the earbuds. For subsequent use, the charging case and the earbuds can be charged independently.

Wait until your Razer Hammerhead True Wireless is fully charged.

BATTERY INDICATOR FOR THE CHARGING CASE WHEN PLUGGED IN

	Status
Static red	Charging
Static green	Fully charged

BATTERY INDICATOR FOR THE CHARGING CASE WHEN UNPLUGGED

	Status
Static green	Battery full
Static orange	Battery low
Static red	Battery critical

PAIRING TO A MOBILE DEVICE

When trying to connect your Razer product, remember to keep it within 1 meter of your mobile device.

1. While inside the charging case, simply open the lid to enter pairing mode.
   
   You will hear an audio prompt while the earbuds are in pairing mode.
   
2. Enable Bluetooth on your mobile device and select "Razer Hammerhead True Wireless Earbuds" from the list of devices found.
   
3. Wait for pairing to complete. You will hear an audio prompt when the earbuds have successfully paired and connected to your device.
   
   If the earbuds fail to connect to your audio source, the earbuds will stay in search mode then power off after 5 minutes. If this happens, simply repeat the steps again to pair.
   Once the earbuds have been paired, it will automatically try to connect to that paired mobile device every time the charging case's lid is opened, or the earbuds are powered on. Your Razer Hammerhead True Wireless Earbuds can only connect to one mobile device at a time.

GAMING MODE

On any earbud, triple tap then hold the last tap for at least 2 seconds to activate gaming mode. Once enabled, your earbuds will function at a lower latency; giving you real-time audio feedback while gaming. Repeat the same gesture to disable gaming mode.

For best performance, it is recommended to keep your earbuds within a very close distance of the audio source.

USING THE SILICON EARBUD SLEEVES

The silicon earbud sleeves offer increased comfort, sound isolation, and security. The soft texture feels better against your ear compared to bare plastic. Device audio improves by separating it from surrounding noise. The sleeves also help to keep the earbud secure by providing grip.

To use them, simply insert the earbud into the corresponding sleeve, and make sure each air vent is properly aligned with the sleeve opening.

POWER ON/OFF

To power off the device, simply place the earbuds back inside the charging case and close the lid.

Opening the lid if they are in the charging case will power them on.

If the earbuds are left idle outside the charging case for a few minutes, you will hear an audio prompt and then the earbuds will power off.

Touch and hold the function button for each earbud for at least 2 seconds to power them on again. You will hear an audio prompt from each earbud once they are powered on.

FUNCTION BUTTON QUICK REFERENCE

The following functions are only available when the earbuds are paired to a mobile device.

SAFETY AND MAINTENANCE

SAFETY GUIDELINES

In order to achieve maximum safety while using your Razer Hammerhead True Wireless Earbuds, we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F).Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in any activity that requires active awareness of your surroundings.
Listening to excessively loud volume over an extended period of time can damage your hearing. Furthermore, legislation of certain countries permits only a maximum sound level of 86dB for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.

MAINTENANCE AND USE

The Razer Hammerhead True Wireless Earbuds requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.