70mai Wide, Midrive DO7 - Dash Cam Manual

Product introduction

Download 70mai App

This product may be used in conjunction with the 70mai App. Pleasesearch for "70mai" in the App Store or scan the following QR code to download and install the App.

Product installation

Preparation prior to installation

Insert the microSD card into the card slot, followed by inserting the power cord into the power port.

Installation

As shown in the figure above, attach the dashcam to the rearview mirror of the original car. Adjust the position of the dashcam properly. If the rearview mirror of the original car is too long, the body may be pulled for adjustment to ensure that the camera is not blocked. Use the fixing straps in the packing box to fix the dash cam.

Run the power cord

As shown in the figure above, run the power cord along the front windshield, A-pillar, and co-pilot storage compartment to the cigarette lighter. Insert the car charger into the cigarette lighter receptacle.

Tips:

• Please use the crowbar in the packing box to embed the power cord into the A-pillar adhesive tape.
• As the positions of cigarette lighter receptacles vary with vehicles, the specific routing of power cords depends on the actual conditions. The preceding figure serves as a reference only.

Adjust the device

Start the vehicle or rotate the key to the ACC gear position to supply power to the cigarette lighter. The dashcam will be turned on automatically.
The camera supports universal angle adjustment, with a rotational range of ±4°. Please adjust the angle according to the preview screen to ensure that the camera is forward-facing.

Startup/shutdown

1. Startup
   The dashcam supports the following ways of startup:
   • Press and hold the power button for startup.
   • Connect the cigarette lighter and start the vehicle. The cigarette lighter will be powered by the vehicle and the dashcam will be turned on automatically.
   • Enable the Parking Surveillance function. The dashcam will be turned on automatically when any collision or movement of the vehicle is detected in Parking Surveillance mode.

If no external power supply is connected and the built-in battery has a low capacity, the dashcam will not be started.

2. Shutdown
   The dashcam supports the following ways for shutdown:
   • Press and hold the power button.
   • Connect the cigarette lighter and turn off the engine. When the power supply from the vehicle to the cigarette lighter is discontinued, the dashcam will be turned off automatically.

The dashcam will be automatically turned off in any of the following circu mstances:

• If no external power supply is connected and the built-in battery has a low capacity;
• If no external power supply is connected and the ambient temperature exceeds the discharge temperature limit of the built-in battery;
• If the dashcam is working under high temperature that exceeds its operating temperature limit;
• If the microSD card is removed while the dashcam is working;
• When the engine is turned off and there is residual power in the cigarette lighter, if the vehicle is kept stationary for 10 minutes (you may select the time for automatic shutdown in the Dash Cam Settings) and the dashcam is left untouched, the product will switch off automatically.

Tips: Once the dashcam has been manually powered off, it needs to be manually powered on the next time you start your vehicle. The Company shall not be liable for any loss that results from your failure to switch off the dashcam manually.

Accessories

(optional)
The rearview function of this product needs to be used with the backup cameras. We provide the following two backup cameras for you to choose.

• 70mai HD Backup Camera
• 70mai Night Vision Backup Camera

Scan the QR code below to obtain the operation guide for backup camera.

Note: The video signal acquired by the backup camera is transmitted to the display screen of the dashcam with a certain delay. The displayed image transmitted from the backup camera is for reference only.

Packing list

1. 70mai Rearview Dash Cam Wide x 1
2. Car charger x 1
3. Power cord x 1
4. Wiring crowbar x 1
5. Fixing strap x 2
6. User manual x 1

Function description

Main interface

Once the dashcam is turned on, it automatically starts to record videos. A flashing red dot in the upper-left corner of the screen indicates that a video is being recorded.

	Audio recording is turned off by default. To start audio recording, press the button below the icon. When started, the icon is replaced with " " If the front/rear dual recording function* is turned on, this icon is replaced with " "
	Press the button below this icon to record an emergency video and save it to the emergency video directory.
	Press and hold the button below the icon for startup and shutdown.
	Press the button below this icon to enter Album list.
	Press the button below this icon to enter Dash Cam Settings.
Icons in the status bar:
	This icon indicates that the rearview function been enabled.
	This icon indicates that the Parking Surveillance function has been enabled.
	This icon indicates that the Wi-Fi hotspot function has been enabled.
	This icon indicates that the Wi-Fi hotspot function has been disabled.

* The rearview function needs to be used with the backup camera.

Tips: Wi-Fi hotspot can be enabled or disabled in Dash Cam Settings.

Video recording mode

Once the dashcam is turned on, it automatically starts to record videos. During normal recording, a red dot flashes on the upper left corner of the screen.
The dashcam is not in the video recording mode and video recording is suspended in any of the following circumstances:

• When the dashcam is providing operating guidance after you start it for the first time;
• When the microSD card is being formatted;
• When the dashcam is being upgraded;
• When the dashcam is restoring its factory settings;
• When the dashcam is receiving the upgrade package sent from App end;
• In the course of all operations after the album is entered at dashcam end or phone App end.

When the dashcam returns to the main screen or exits the preceding procedure, it reverts back to video recording automatically.

Emergency video

Emergency videos may be recorded by the following ways:

• Press the button below the " " icon on the main interface.
• Start the dashcam so that it can record an emergency video automatically when it detects any collision.

The process of recording an emergency video cannot be interrupted. When the emergency video recording is completed, the dashcam automatically enters the normal video recording mode.
The sensitivity of the emergency video may be modified in Dash Cam Settings. The emergency video recording is more likely to be triggered with high sen sitivity. If you do not want the dashcam to automatically enter the emergency video recording mode, you may disable this function under Settings.
Due to the complexity of road conditions, the dashcam may not save every emergency video to the emergency video directory. If you are unable to locate an emergency video in the emergency video directory, please search the normal video directory.
The system allocates specific storage space for emergency videos in the microSD card. When the storage limit is reached, the earliest emergency video will be deleted if a new emergency video is added. Please export important emergency videos to your mobile phone or computer for backup in a timely manner.

Parking Surveillance

The Parking Surveillance function can be enabled only after the parking surveillance cable has to be installed.
When the Parking Surveillance function is enabled, the dashcam will enter the Parking Surveillance mode after the engine is turned off. In the event of a collision when the vehicle is being parked, the dashcam automatically records a video and saves it to the Parking Surveillance video directory. The device will remind you to view the video on next time startup.
The Parking Surveillance function relies on an acceleration sensor to detect collision of parked vehicles. Due to the complexity of the environment, we are unable to guarantee that every collision of your parked vehicle can be accurately identified. If frequent false alarms are given due to vibration rather than collision, this function may be disabled in Settings.

Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Product specifications

Model: Midrive D07
Processor: HiSilicon Hi3556
Resolution: 1920 x 1080
Camera: FOV 130°
Wireless connection: Wi-Fi IEEE802.11 b/g/n 2.4 GHz
Sensor: Acceleration sensor
Supported system: Android 4.4 or iOS 8.0 and higher versions
Expandable memory: Supports 16~64 GB MicroSD cards that have a rating of Class 10 or above.
Power supply: Car cigarette lighter
Battery capacity: 470 mAh
Battery type: Lithium-ion polymer battery
Operating temperature: -10°C to 60°C
Input: 5 V 2 A

Precautions

Before using this product, please read all precautions and online guides to ensure correct and safe use.

• This product is an ancillary product designed to record external videos of your vehicle. The use of this product could not guarantee your driving safety. The Company shall not be liable for any traffic accidents caused by faults, loss of information, or operation of the product, nor shall the Company bear any loss thereof.
• Some functions of this product may not work properly due to the differences in vehicle conditions, driving modes and driving environments. The Company shall not guarantee that the product will be able to work normally under any conditions such as power failure, use beyond the normal temperature/humidity range, collision, microSD card damage, as well as other conditions that may result in functional anomalies. The videos recorded by the dashcam are for reference only.
• Please install this product properly to avoid blocking the driver's line of sight and affecting the airbag; otherwise it may result in product faults and personal injuries.
• Please use the standard car charger, power cord and other accessories of this product to avoid any failure caused by non-conformances. The Company shall not be liable for any loss caused by the use of a non-standard car charger or power cord.
• The microSD card is not included in the packing list of the product. Please purchase the microSD card separately.
• The default file partition format of the microSD card may be inconsistent with the format supported by this product. When inserting the microSD card for the first time, please format it in the dashcam before use.
• Please purchase high-quality microSD cards through proper channels. Low-quality microSD cards may lead to issues such as inconsistencies between the nominal read/write speed and the actual read/write speed, as well as inconsistencies between the nominal capacity and the actual capacity. The Company shall not be liable for any loss or damage of videos as a result of the use of low-quality microSD cards.
• In the event of battery deformation, swelling or leakage during the use or storage of the product, please discontinue use and contact our after-sales service center to avoid safety problems.
• Please keep this product away from strong magnetic fields, which may cause damage to the product.
• Do not use this product at temperatures above 60°C or below -10°C.
• Please use this product to the extent permitted by law.

Service: help@70mai.com
For further information, please go to www.70mai.com
Manufacturer: 70mai Co., Ltd.
Address: Room2220, building2, No.588, Zixingroad, MinHangDistrict, Shanghai, China

Documents / Resources

References

• 70mai: Innovator in Smart Dash Cams

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download 70mai Wide, Midrive DO7 - Dash Cam Manual