XGIMI HORIZON, HORIZON PRO - Projector Manual

Introduction

Device on/off

Connect to the power source, and press the button to turn on the device.
When the device is on, press the button to turn Off the device.

Remote control pairing

Place the remote control within 10 cm of the device, press and simultaneously until an indicator light begins flashing. This means that the remote control enters the pairing mode. When a "Ding" is heard, the connection is successful.
If the pairing fails, it will exit after 30 seconds. Repeat the above steps after exiting.

Automatic focus adjustment/Remote focus adjustment

When the automatic focus adjustment function is enabled, the frame will be adjusted automatically when you turn on the device or move it to another location.
Enable automatic focus by pressing . After holding on to the enable manual focus adjustment, you can manually adjust the focus by pressing the "left/right" button or the "VOL+/-" button. After the adjustment, you can press other buttons to exit.

Automatic keystone correction

Google Assistant

Talk to Google to control your TV using your voice.
Press the Google Assistant button on your remote to search for movies and shows, get recommendations to match your mood, get answers, control smart home devices, and more.

Bluetooth speaker

Use mobile Bluetooth settings to search for "XGIMI HORIZON PRO" or "XGIMI HORIZON" to pair with the device and play songs.
If you need to turn off the projection frame during music playback, you can press the "Power" button and select "Display Off".

More settings

At any interface, you can press the "" button on the remote control to quickly set your device. To configure more settings, go to the "All Settings" page.
The main settings are described as follows:

• Brightness and color
  Select a brightness mode, such as standard, bright, eye-protection, and adjust the brightness level. If the "Environmental Adaptation" function is enabled, the device can automatically adjust the brightness based on the ambient brightness.
• Image mode
  Select different image modes in different scenarios, such as movie, football, office, and game, to adjust the image parameters of the video or signal source. The low-latency option is available in game mode.

• Sound effect
  Select different sound effects in different scenarios, such as movie, music, and sport, to enjoy the optimal sound experience.
• Focus calibration
  If the automatic focus adjustment function is not as good as before after long-term use, you can tune the automatic focus adjustment function through "Focus Calibration".
  Note: When calibrating. make sure that the device is in the front projection sate and that it is 1to 2 meters away from the wall or screen.

• Keystone calibration
  If you are not satisfied with the effect Of the automatic keystone correction function, you can recalibrate the automatic keystone correction function through "Keystone Calibration".
  Note: When calibrating, make sure that the device is in the front projection state and that it is 1to 2 meters away from the wall or screen.
• Gyro calibration
  If the automatic keystone correction function is not as good as before after long-term use, you can recalibrate the gyro through "Gyro Calibration" to optimize the effect of automatic keystone correction.
  Note: Make sure that the device is placed horizontally during calibration.

Online upgrade

Check the latest version and upgrade the system through 'Settings" -> "Device Preferences"-> "About" -> "System Update".

Chromecast Built-in^TM

Chromecast built-in
Easily cast your favorite movies, music, and more to your TV with Chromecast built-in.
Simply tap the Cast button from apps you already know and love to stream entertainment from your phone, tablet or laptop to the TV.While you' re streaming, you can keep using your phone for other things- scroll through social media, send a text, and even accept calls.

Important Precautions

Correct use of the device:

• Do not face lens into eyes because the strong projector light may cause injury to the eyes.
• Do not block the air inlet/outlet of the device in order to avoid damage to internal electronic devices arising from normal heat dissipation failure of the device.
• Do not wipe the lens directly with cleaning tools including paper and cloth in order to avoid damage to the lens. Please clean up the dust on the lens surface through clean air blowing. Do not wash the device with chemicals, detergents, or any liquid in order to prevent the circuit board from being corroded by rainwater, moisture, and mineral-containing liquids. Keep the device and its components and accessories out of reach of children.
• Make sure that the device is used in a dry and ventilated environment.
• DO not store the device in overheated or over cooled places, because extreme temperatures will shorten the life of electronic devices. Place and use the device in an environment of 0º-40'C.
• Do not put the device into any heating equipment (such as dyer and microwave oven) for drying.
• Do not firmly extrude the device or place barriers on it or its back to avoid damage to the device.
• Do not throw, strike, or sharply vibrate the device to avoid damage to the internal circuit board.
• Do not try to disassemble and assemble the device yourself. If any issue occurs, please contact the after-sales service of XGIMI.
• Do not repair any product on your own. If the device or any component cannot work properly, consult the after-sales service of XGIMI in a timely manner or return it to the factory for repair.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download XGIMI HORIZON, HORIZON PRO - Projector Manual