XGIMI Halo+, WM03A Manual

Also See for Halo+:

User manual (187 pages)

User manual (16 pages)

User manual (173 pages)

Table of Contents

Contents

1 Introduction
2 Overview
3 Getting Started
4 Important Precautions
5 Documents / Resources
- 5.1 Download manual

XGIMI Halo+, WM03A Manual

Introduction

Please read the Product Instructions carefully before using the product
You should read the Product Instructions carefully before using this product for both your safety and interests. XGIMI Technology disclaims all responsibilities for any personal injury, damage to property, or other loss that may occur as a result of improper or unsafe use of this product.

Overview

Front View

Auto Focus TOF Part
Auto Keystone Correction
Note: To prevent auto keystone correction failure, avoid blocking the sensor.

Button&input View

Bottom View

Remote View

To adjust the volume, switch to "VOL" first, as seen above. Then use the VOL +/- button to adjust
To adjust the focus, switch to "Focus" first, as seen above. Then use the VOL +/- button to adjust

LED Indicator Guide

Device Button	Device Status L	LED status	Description
	Device ON	Off	The battery capacity is more than 30%
	Device ON	Flashing Red	The battery capacity is less than 30%
	Device Off	Solid Red	Charging. The battery capacity is less than 90%
	Device Off	Solid Green Then Off	The battery' capacity is more than 90%

Device Status

Display Off: Only switch off the display. Other parts are still working.
Restart: Restart the device completely.
Hibernate: The device will reboot quickly next time.
Power Off: Switch Off the device completely. This mode is suitable for outing. Next time, press the device's power button twice to power on the device.

Getting Started

Device on/off

When you use the device for the first time, the mistouch prevention feature is enabled. Therefore, press the device's power button twice to power on the device We recommend that you connect the device to the power source during its first-time use.

Device Status

Device Status	How to Enable	Description
Power Off	Press the device's power button twice	This mode is suitable for outing because it saves the battery life and avoids start-up due to accidental touch
Hibernate	Press the power button of the device or the remote control	It consumes little battery. The device will reboot quickly next time
Display Off	Press the power button of the remote control or the device	Only the display is switched off. Other parts are still working

Action	Trigger	How to Trigger
Power Off	Power button of the device	Press the device's power button to trigger the instructions on the screen. Long press the device's power button as instructed
Hibernate	Power button of the device	Press the device's power button to trigger the instructions on the screen. Short press the device's power button again as instructed
Power Off	Power button of the remote control	Press the power button of the remote control and select an action as instructed on the screen
Hibernate	Power button of the remote control

Remote Control Pairing

Position the remote control within 10 Cm Of the device. Press "" and "" simultaneously. An indicator light will begin flashing as the remote control enters pairing mode. Release the buttons when the flashing begins. After hearing a " ding" sound, the connection is successful.
If pairing fails, wait for 30 seconds and repeat the steps above.

Function Description of Remote Control Functions

Focus adjustment
When the function switch at the bottom of the remote control is moved to the right (Focus), the automatic focus function is enabled. You can adjust the focus by using the " VOL +/-" button. When the function switch is moved to the left (VOL), focus adjustment is disabled. You can use the " VOL +/-" button to control the device volume.
Shortcut
To access the shortcut menu, short press the Settings button ""

Automatic Focus Adjustment/Remote Focus Adjustment

When the automatic focus adjustment function is enabled, the frame will be adjusted automatically when you turn on the device or move it to another location.
You can enable automatic focus by using the switch at the bottom of the remote control. Move the switch to the right (Focus)so that the "VOL +/-"button can be used to adjust the frame.

Extra spacing between keystone & correction

When the automatic keystone correction function is enabled, the frame will be adjusted automatically if you move the device to another location.

When the automatic obstacle avoidance function is enabled, the frame will automatically avoid obstacles if there are obstacles in the projection area. When the automatic screen alignment function is enabled, the frame will automatically match the screen if there is a 16:9 or 16:10 screen in the projection area.

Press the button on the remote control to enter the "Keystone Correction" page, Select "Auto Keystone Correction" to enable the automatic keystone correction function. Select "Manual Keystone Correction" to adjust the four points and the size of the frame.

Google Assistant

Press the Google Assistant button on your remote control and use your voice to search for movies and shows, inquiry answers, recommendations to match your mood, control your smart home devices, and more.

Bluetooth Speaker

Enable Bluetooth on your smartphone and search for "XGIMI Halo+". After pairing both devices, you can play songs via the projector's speakers.

Chromecast Built-in^TM

Chromecast built-in

Easily cast your favorite movies, music, and more to your TV with Chromecast built-in.
Simply tap the Cast button from apps you already know and love to stream entertainment from your phone, tablet or laptop to the TV. While you're streaming, you can keep using your phone for other things- scroll through social media, send a text, and even accept calls.

More Settings

Set your device and image at any interface by using the Settings button on the remote control
The various settings are described as follows.

Brightness & Color	Select a brightness mode and adjust the parameters.
Image Mode	Select different image modes in different scenarios, such as movie, football, office and game, to adjust the image parameters of video ar signal source. The Iow-latency option is available in game mode.
Sound Effects	Adjusts the frame ratio of a signal source
Focus Calibration	Recalibrate the auto focus function after long-term use if it reduces in quality by selecting "Focus Calibration". Note Follow the onscreen instructions.
Keystone Calibration	If you are not satisfied with the effect of the automatic keystone correction function, you can recalibrate the automatic keystone correction function through "Keystone Calibration". Note. Follow instructions on the screen.
Gyro Calibration	If the automatic keystone correction function is not as good as before after long-term use, you can recalibrate the gyro through "Gyro Calibration " to optimize the effect of automatic keystone correction Follow instructions on the screen.

Charging Instruction

The device should be charged with an official, standardized adaptor.
Charging time will be lengthened for charging under the power-on state.
If you plug into an adapter under the powered-off state, a blinking red indicator light represents charging while the green indicator light represents that the battery is fully charged. (The green indicator light will extinguish after it is on for 10s.)
If your device will remain unused for long periods of time, the device should be fully charged. Select the Power Off mode when you switch off the device. (In this mode, the mistouch prevention feature is enabled. The power consumption is low, and the device cannot be powered on by using a remote control. Users can only press the device's power button twice to power on the device. Alternatively, you can connect the device to the adapter, and the mistouch prevention feature is disabled by default. Then, you can simply press the power button once to power on the device.) Moreover, charge the device once every 3 months to avoid irreversible capacity loss or damage arising from low battery. This is because the battery will self-discharge during the excessively long storage time.

System Upgrade

The system can be upgraded only when the device has at least 50% battery power or is connected to a power source.
Online upgrade
The online upgrade can be performed through system settings.
Note: Thc online upgrade ran be made through system settings ""

Important Precautions

Correct use of the device:

Do not stare directly into the projector lens or have it facing you as the light may be harmful to your eyes.
Do not block the device's air inlet/outlet to avoid heat dissipation failure and damaging the internal electronic components.
DO not wipe the lens directly with cleaning paper, cloths, etc., to avoid damaging the lens. Please use a lens/air blower to remove dust from the lens properly.
Do not wash the device with cleaning chemicals, detergents, or any other liquid to prevent the circuit board from corroding. Avoid exposing the device to rainwater, moisture, and mineral-containing liquids.
Keep the device, its components, and accessories out of the reach of children.
Make sure that the device is used in a dry and ventilated environment.
Do not store the device in overheated or over cooled places, because extreme temperatures will shorten the life of electronic devices. Place and use the device in an environment Of 0ºC-40ºC.
Do not put the device into any heating equipment (such as dryer and microwave oven) for drying.
Do not firmly extrude the device or place barriers on it or its back to avoid damage to the device.
Do not throw, strike, or sharply vibrate the device to avoid damage to the internal circuit board.
DO not try to disassemble and assemble the device yourself. If any issue occurs, please contact the after-sales service of XGIMI
Do not repair any product on your own. If the device or any component cannot work properly, consult the after-sales service of XGIMI in a timely manner or return it to the factory for repair.
Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
As with any bright source, do not stare into the direct beam, RG2IEC62471-5:2015.