About The Input Connectors On This Unit; Connection To Input1 And Input2 - Pioneer Elite PRO-1000HDI Operating Instructions Manual

About the Input Connectors on this
Unit
Consult the following chart when making connections to
a plasma display (pages 9 to 16).
Input Connector INPUT
Connected
1
component and signals
Analog RGB
Component video
S video
Composite video
Digital video
Analog RGB
S video
Composite video
*1 Although INPUT1/INPUT2 are compatible with various kinds
of signals, setup using the on-screen menu is necessary after
connections are made in order match the characteristics of
the source component (pages 18 and 19).
*2 INPUT1 is compatible with Microsoft's Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
*4 Although INPUT5 is compatible with various kinds of signals,
setup using the on-screen menu is necessary after
connections are made in order match the characteristics of
the source component (pages 20 and 21).

Connection to INPUT1 and INPUT2

Various components can be connected to the INPUT1 and
INPUT2 terminals. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see pages 18 and 19 for
on-screen setup after connection.
INPUT2 terminal
[ON SYNC]
Output source
G
Video component/
G ON SYNC
Personal
computer (PC)
G
with RGB output
G
Video component
with component
Y
video output
: Do not connect anything.
Note
Components compatible with INPUT1 are also compatible with
INPUT2.
When making connections to INPUT1, please refer to
supplement 4 on page 42.
INPUT INPUT INPUT INPUT
*1 *1 *4
2 3 4 5
*5
*2
*3
*3
[H/V SYNC]
B R HD VD
B
R
B R H/V SYNC
B R HD VD
C /P C /P
B B R R
: Connect to this jack.
Installation and Connections
For the screen sizes and input signals that INPUT1
and INPUT2 are compatible with, please refer to
supplement 1 (pages 39 to 40) and supplement 2
(page 41).
Connection to AV components
Connection to AV component that has
component video jacks
Make component video connections for AV components
such as DVD and LD players or similar components with
component video output capability.
When connecting to INPUT1
INPUT1
OUTPUT
ANALOG RGB (ANALOG RGB)
On-screen setup is necessary after connection.
Please see page 18.
When connecting to INPUT2
(ON SYNC) INPUT2 (H/V SYNC)
G B R HD VD
Connect the Y signal to the G terminal, the C
the B terminal, and the C /P
R R
On-screen setup is necessary after connection.
Please see page 18.
75 2.2
Ô
k
/P signal to
B B
signal to the R terminal.
9
I I
PRO-1000HD / PRO-800HD