Installation Coordinates For Screws Used To Attach The Stand To A Surface; External Dimensions - Pioneer PDP-607CMX Technical Manual

4.4.2 Installation coordinates for screws used to attach the stand to a surface

* To stabilize the equipment on the floor, use screws that have a nominal diameter of 6 mm to 8 mm (1/4 inch to
5/16 inch) and that are at least 25 mm (31/32 inch) long.
Unit: mm (inch)
253.5
(9-31/32)

4.4.3 External Dimensions

7 When using Plasma Display
Unit: mm (inch)
963 (37-29/32)
To stabilize the equipment on
the floor, use screws that have
a nominal diameter of 6 mm to
8 mm (1/4 inch to 5/16 inch)
and that are at least 25 mm
Min. 25 mm
(31/32 inch)
(31/32 inch) long.
1470 (57-7/8)
1125 (44-9/32)
Table Top Stand: PDK-TS26
430 (16-15/16)
65