Sat Control Buttons - Pioneer PDP-4360HD Operating Instructions Manual

Useful Remote Control Features
13
1
2
3
4
5
82
En
Mode switch
(with "CBL/SAT"
selected)
6
7
8

SAT control buttons

When the SAT function has been preset by the learning
function of the remote control, the remote control unit buttons
will function as shown below.
• When the Mode switch is set to CBL/SAT, satellite
broadcast tuners made by other manufacturers and not
preset can also be operated with the remote control unit if 1
to 8 have learned the functions. See page 78.
1 0 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
2 CH +/–
Selects a higher or lower channel.
3 ENTER, / / /
Activates the selected function.
ENTER:
/ / /
: Selects items on the SAT GUIDE screen or
SAT MENU screen.
4 SAT INFO
Displays information on satellite broadcasting.
• Set up this button with the learning function if
necessary.
5 SOURCE 
Turns the Satellite broadcast tuner power on and off.
6 CH ENTER
Enters the selected channel with the direct channel
selection buttons.
• Set up this button with the learning function if
necessary.
7 SAT MENU
Displays the satellite broadcasting menu screen.
8 SAT GUIDE
Displays the satellite broadcasting guide screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device's remote
control.