Sat Control Buttons - Pioneer PureVision ElitePRO-920HD Operating Instructions Manual

13 Useful Remote Control Features
1
2
3
4
5
66
En
Mode switch
(with "CBL/SAT"
selected)
6
7
8

SAT control buttons

When the SAT is preset by the learning function of the remote
control, the remote control unit buttons will function as shown
below.
• When the Mode switch is set to CBL/SAT, satellite broadcast
tuners made by other manufacturers and not preset can also
be operated with the remote control unit if 1 to 8 have
learned the functions. See page 62.
1 0 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
2 CH +/–
Press CH + or CH – to tune in a higher or lower channel.
3 ENTER, / / /
ENTER: Press to activate the selected function.
/ / / : Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
4 SAT INFO
When this button is pressed, information on satellite
broadcasting will appear.
• Use this button to learn if necessary.
5 SOURCE
Turns the Satellite broadcast tuner power on and off.
6 CH ENTER
Fix the selected channel with the direct channel selection
buttons.
• Use this button to learn if necessary.
7 SAT MENU
When this button is pressed, the satellite broadcasting
menu screen will appear.
8 SAT GUIDE
When this button is pressed, the satellite broadcasting
guide screen will appear.
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons on the remote control can learn the
control signal from another device's remote control.