Enjoying A Game Console Or Watching Camcorder Images; Connecting A Game Console Or Camcorder; Displaying An Image Of The Game Console Or Camcorder; Recording Digital Tv Programs Using A Vcr - Pioneer PDP-4360HD Operating Instructions Manual

Enjoying through External Equipment
Item Description
Auto Automatically identifies input audio signals.
(factory default)
Accepts digital audio signals.
Digital
Accepts analog audio signals.
Analog
6
Press HOME MENU to exit the menu.
NOTE
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analog audio cables.
Enjoying a game console or watching
camcorder images

Connecting a game console or camcorder

Use the INPUT 4 terminals to connect a game console,
camcorder and other audiovisual equipment.
Media Receiver (front view)
Y C / P C / P S-VIDEO
B B R R
COMPONENT VIDEO
INPUT 4
S-Video cable
(commercially available)
Component Video cable
(commercially available)
VIDEO L AUDIO R
ANALOG RGB
PC PC
AV cable
(commercially available)
Game console/Camcorder
NOTE
• The INPUT 4 terminals are checked whether they are
connected in the following order; 1) Component Video, 2) S-
Video, 3) Video.
Use the desired connection for viewing.
• Connect external equipment to only terminals that are to be
actually used.
Displaying an image of the game console or
camcorder
To watch an image coming from the game console or
camcorder, press INPUT 4 on the remote control unit or press
INPUT on the Media Receiver to select INPUT4.
Recording digital TV programs using a
VCR
If you connect recording equipment such as a VCR to the
MONITOR OUT terminals on the rear of the Media Receiver,
you can record, for example, digital TV programs using the
recording equipment.
You can also record digital TV programs more easily by using
the TV Guide On Screen™ system. Connect the supplied G-
LINK cable to the G-LINK terminal on the rear of the Media
Receiver and then position the G-LINK cable's wand so that its
light emitting section faces the remote control sensor on the
recording equipment. For more information, see page 76.

Avoiding unwanted feedback

You can prevent unwanted feedback from adversely affecting
the quality of images. Specify the output terminal whose
output is to be inhibited.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "Monitor Out". ( /
4
Select "INPUT1 Prohibit", "INPUT2 Prohibit", "INPUT3
Prohibit", or "INPUT4 Prohibit". ( /
5
Press HOME MENU to exit the menu.
then ENTER)
then ENTER)
12
69
En