Pioneer PDP-4360HD Operating Instructions Manual page 35

TV Guide On Screen™ System Setup
Screen 15: Is a VCR Connected?
• If you select "Yes", you see Screen 16.
• If you select "No", you see Screen 21.
Screen 16: VCR Configuration Diagram
• This screen shows the correct way to install the G-LINK cable
from the back of the device to the recording device. Make
sure the G-LINK cable is properly installed.
• Press ENTER, and you see Screen 17.
Screen 17: VCR Brand Name
• Press / to select the brand of the recording device.
• Press ENTER, and you see Screen 18.
Screen 18: VCR Preparation
• Follow the on-screen instructions, and press ENTER to
display Screen 19.
Screen 19: VCR Code Testing
• When testing is done, Screen 20 displays automatically.
07
35
En