Download  Print this page

Pioneer Kuro KRP-500M Operating Instructions Manual Page 78

Flat panel display.
Hide thumbs

Advertisement

Use Other Equipment With Your Flat Panel Display
06
• Banner Input: determines the input signal for the small window in P-in-P mode
1080
The Banner sub-screen option uses only the
top 1/4 of a PC signal input. When adding a
picture or text, the image or text must be
placed in the top 1/4 area.
Note: The higher the resolution becomes on the main screen image, the lower the contrast becomes on the small
window image.
Signals that support Banner PIP are XGA 60 Hz and WXGA 60 Hz.
IP Control Lock
This locks or unlocks the IP Control settings.
Note: This setting applies to all input sources.
Network ID Beacon
This option authenticates the connection between the specified equipment and the flat panel display.
78
En
Parameter
Translucent
On
Off*
Banner PIP
Off*
Bottom 1 through 3 adjusts display positions
Mid Low/High
Top 1 through 3
Banner Input
INPUT 3* through 6 determines the input signal
1920
810
540
270
Parameter
On
Off*
Parameter
On
Off*
Description
adjusts the translucent rate
No effect
No effect
MID HIGH
MID LOW
Description
locks the IP Control settings
No effect
Description
applies the Network ID Beacon
No effect
*Factory default
TOP 3
TOP 2
TOP 1
BOTTOM 3
BOTTOM 2
BOTTOM 1
*Factory default
*Factory default

Advertisement

Chapters

Table of Contents

   Also See for Pioneer Kuro KRP-500M

   Related Manuals for Pioneer Kuro KRP-500M

This manual is also suitable for:

Kuro krp-600mKrp 500m - 50" lcd flat panel display

Comments to this Manuals

Symbols: 0
Latest comments: