Download  Print this page

Apply Settings For Other Equipment; Apply Settings For An Av System - Pioneer Kuro KRP-500M Operating Instructions Manual

Flat panel display.
Hide thumbs

Advertisement

Use Other Equipment With Your Flat Panel Display
06

6.2 Apply Settings for Other Equipment

This section provides setting hints for the connected equipment including devices using Composite Video,
Component Video, and DVI equipment as well as a PC. For connection details, see page 20.
6.2.1

Apply Settings for an AV System

After connecting other equipment to your flat panel display, you may need to enter an input name, color signal
and signal type, depending on the input you select. For details on settings, follow the directions below.
Composite/Component Video System
1 ) Access INPUT 1(Video) or INPUT 2(Component) through the Input Setup menu.
2 ) Select the desired items.
• INPUT 1(Video)
Video, Blu-Ray, DVD, DVR, VCR, Cable, Satellite, GAME or Computer for Input Name;
Auto, PAL, SECAM, NTSC, 4.43NTSC, PAL-M or PAL-N for Color System
• INPUT 2 (Component)
Component, Blu-Ray, DVD, DVR, VCR, Cable, Satellite, GAME or Computer;
Comp.1 (YCbCr) or Comp.2 (YPbPr)
3 ) Press EXIT to exit the menu.
Notes: The factory default setting is Comp. 1 for SD signals and Comp. 2 for HD signals.
Improper setting for Color Decoding causes the image to appear in inappropriate color.
DVI Equipment
1 ) Access INPUT 4(DVI) through the Input Setup menu.
2 ) Select the desired item.
DVI, Blu-Ray, DVD, DVR, VCR, Cable, Satellite, GAME or Computer;
Video or PC for Signal Type; Auto, 1 (YUV422), 2 (YUV444), 3 (RGB16-235) or 4 (RGB 0-255) for Video
3 ) Press EXIT to exit the menu.
Notes: After setting DVI, turn on the connected equipment (reboot if a PC is connected). Changing the settings
while leaving the connected equipment turned On may cause the signal to fail or become corrupted.
Connecting to a PC's DVI terminal using an HDMI cable can cause improper images to appear. To use an
HDMI cable, contact the PC manufacturer.
56
En
Input Setup 1/2
INPUT 1 (Video)
Input Name
:
Color System
:
INPUT 2 (Component)
:
Color Decoding
INPUT 3 (D-Sub 15)
Input Name
:
Color Decoding
:
INPUT 4 (DVI)
Input Name
:
Signal Type
:
Video
:
Exit
Video
Auto
Component
D-Sub 15
RGB
DVI
Video
Auto

Advertisement

Chapters

Table of Contents

   Also See for Pioneer Kuro KRP-500M

   Related Manuals for Pioneer Kuro KRP-500M

This manual is also suitable for:

Kuro krp-600mKrp 500m - 50" lcd flat panel display

Comments to this Manuals

Symbols: 0
Latest comments: