Advertisement
ASSEMBLY & OPERATING INSTRUCTIONS
MODEL #57568 LP (LIQUID PROPANE)
MODEL #57569 NG (NATURAL GAS)
DANGER
If you smell gas:
•Shut off gas to the appliance.
•Extinguish any open flame.
•Open lid.
•If odor continues, keep away from
the appliance and immediately call
your gas supplier or your
fire department.
38 INCH GRILL HEAD
BRAHMA
WARNING
•
Do not store or use gasoline
or other flammable liquids
or vapors in the vicinity of
this or any other appliance.
•
An LP cylinder not
connected for use shall
not be stored in the
vicinity of this or any
other appliance.
USA EDITION
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bull BRAHMA 57568 LP
Summary of Contents for Bull BRAHMA 57568 LP
- Page 1 38 INCH GRILL HEAD ASSEMBLY & OPERATING INSTRUCTIONS BRAHMA MODEL #57568 LP (LIQUID PROPANE) MODEL #57569 NG (NATURAL GAS) DANGER WARNING • Do not store or use gasoline If you smell gas: or other flammable liquids •Shut off gas to the appliance. or vapors in the vicinity of •Extinguish any open flame.
- Page 2 TABLE OF CONTENTS PAGE # HOW TO REGISTER YOUR GRILL, SERIAL NO. LOCATION, REPLACEMENT PART ORDERING REPLACEMENT PARTS LIST REPLACEMENT PARTS LIST ILLUSTRATION ROTISSERIE SYSTEM REPLACEMENT PARTS LIST WITH ILLUSTRATION ROTISSERIE INSTALL INSTRUCTIONS GRILL SAFETY AND OPERATIONAL GUIDELINES GRILL OPERATIONAL SAFETY ‘WHAT TO DO’...
- Page 3 Thank you for choosing Bull Outdoor Products. To enable our commitment to your satisfaction, you will need to register your purchase for it to be covered under Bull’s warranty policy. Please save your purchase receipt as it is required for warranty claims.
-
Page 4: Serial Number Locations
Right Side of Grease Tray BRAHMA GRILL SKU# 57568 LP SKU# 57569 NG REPLACEMENT PARTS LIST ITEM NO. USED ON PARTS DESCRIPTION WARRANTY BULL SKU NO. LIST ILLUSTRATION (NEXT PERIOD (YEARS) INDICATES SERIAL NUMBER REQUIRED PAGE) 57003 INSERT ASSEMBLY (2016 & OLDER MODELS) Lifetime 57025 INSERT ASSEMBLY (2017 &... - Page 5 BRAHMA REPLACEMENT PARTS LIST ILLUSTRATION REPLACEMENT GAS PLUMBING PARTS REPLACEMENT ELECTRICAL PARTS WARNING:U...
- Page 6 ROTISSERIE SYSTEM REPLACEMENT PARTS LIST WITH EXPLODED ILLUSTRATION AND INSTALL INSTRUCTIONS REF # PARTS # DESCRIPTION 16552 110 VAC MOTOR W/SWITCH 16554 MOTOR MOUNT BRACKET 16618 38" GRILL SPIT ROD 16553 LARGE 4-PRONG SPIT FORK 16591 SHAFT COLLAR 16587 1/4-20 X 1/2 THUMBSCREW 16675 KEY WASHER 16586...
- Page 7 GRILL OPERATION SAFETY INSTRUCTIONS WARNING! FOR YOUR SAFETY, READ THE GUIDELINES BELOW FOR ASSEMBLY AND OPERATION OF YOUR GRILL YOUR GAS GRILL IS ONLY FOR OUTDOOR USE. PROTECT CHILDREN: DO NOT ALLOW CHILDREN TO OPERATE THE GRILL. KEEP THEM AWAY FROM THE GRILL DURING USE, AND UNTIL THE GRILL HAS COOLED COMPLETELY.
- Page 8 SHOULD BE REPLACED, USE ONLY THE BULL PART NUMBERS SHOWN IN THE PARTS LIST SUPPLIED WITH THIS UNIT. THE REPLACEMENT HOSE ASSEMBLY SHALL BE SPECIFIED BY THE MANUFACTURER. 15) LP GAS PRESSURE REGULATOR AND 31” INCH HOSE ASSEMBLY (BULL PART # 16589) ARE SUPPLIED AND MUST BE USED WITHOUT ALTERATION AND SHOULD ONLY BE USED ON THIS GRILL.
- Page 9 LIQUID PROPANE GAS TO NATURAL GAS CONVERSION FIRE CAUSING SERIOUS INJURY OR DEATH MAY OCCUR Gas valves are pre-set at the Bull factory to operate on LP Gas or Natural Gas. If you wish to convert to a different gas type, other than LP or NG, be sure to contact your grill dealer, licensed plumber, or authorized service center for further details.
- Page 10 NATURAL GAS CONNECTION TO GRILL IMPORTANT: Bull Outdoor Products does not recommend the use of any quick connection fittings or lines to the unit. The use of these types of fittings or lines could cause low gas flow and reduce the performance of the unit.
- Page 11 GRILL OVERHEAD VENTILATION INSTRUCTIONS...
- Page 12 Your Bull dealer has enclosure vents made by Bull that meet industry standards to help. If Bull vents are not used, please follow the guidelines and drawings below explain the details for the size and arrangement for these vents to meet your grill’s ventilation needs. The four vents are required to be arranged in pairs.
- Page 13 NOTE: AN LP TANK (CYLINDER) WITHIN AN ENCLOSURE MUST USE A TANK RETENTION SYSTEM TO PREVENT BEING KNOCKED OVER An LP Tank Retention System can be obtained through your Bull Dealer. Below are the requirements with supportive illustrations on how to install: Any Tank Retention system must be securely fastened to the island floor using bolts with washers and nuts.
- Page 14 LP SUPPLY LINE DETAILS GRILL INSTALLATION INTO AN ENCLOSURE FOR LIQUID PROPANE OR NATURAL GAS GRILLS GRILL INSTALLATION DETAILS (DIMENSIONS ARE IN INCHES) Per illustration, the sides and back of the grill should not be any closer than 21 inches to combustible construction. WARNING: IF THESE GUIDELINES ARE NOT FOLLOWED, FIRE CAUSING SERIOUS INJURY OR DEATH MAY OCCUR...
- Page 15 Manufactured Homes, ANSI Z21.75 For post-mounted outdoor cooking gas appliances, in-ground metallic posts shall be protected against corrosion as warranted by soil conditions. A suitable coating of corrosion protection will retard the effects of corrosion and help your Bull purchase last longer. IMPORTANT INSTALLATION GUIDELINES: 1) Vents must be provided for combustion air and ventilation on both sides of the built-in cabinet.
- Page 16 LIGHT SYSTEM TRANSFORMER INSTALLATION NOTE: Per illustration below, the transformer must be installed at least 6 inches above the ground to ensure transformer and interior light system longevity. The transformer has mounting holes so you can fasten to the frame inside your island or grill enclosure.
- Page 17 GRILL ‘FIRST USE’ LIGHTING PROCEDURE • DO NOT SMOKE WHILE LIGHTING GRILL OR CHECKING GAS SUPPLY • CONNECTIONS BECOME FAMILIAR WITH THE SAFETY GUIDELINES AT THE FRONT OF THE MANUAL • DO NOT LEAVE GRILL UNATTENDED DURING USE • DO NOT MOVE GRILL DURING USE •...
-
Page 18: Lighting Main Burner(S)
GRILL STANDARD LIGHTING PROCEDURE DO NOT SMOKE WHILE LIGHTING GRILL OR CHECKING GAS SUPPLY CONNECTIONS! Set ALL BBQ Grill control knobs to “OFF” Control Knob and open gas supply, LP cylinder or Natural Gas Valve. ‘OFF’ Position HIGH’ Position LIGHTING MAIN BURNER(S): 1) Become familiar with the safety guidelines at the front of the manual. - Page 19 TO LIGHT GRILL WITH A FIREPLACE-TYPE MATCH NOTE: To light gas grill with a fireplace-type match, Use provided Lighting Rod to hold a lighted fireplace type match or long-necked butane lighter placing flame near to burner ports. Push in control knob completely and rotate slowly (3 to 4 seconds) about 1/4 turn to the left counter clockwise until a click is heard. The 3 to 4 second duration should supply enough gas to light the burner.
- Page 20 Place cooking grates in grill insert on ledge above flame tamers. Please read Safety, Lighting and Operating Instructions carefully. For additional help go to https://bullbbq.com/bull-support-videos/ where we show you how to install components NOW YOUR GAS GRILL IS READY TO USE!
- Page 21 ROTISSERIE SYSTEM INSTALLATION TO GRILL 1) The trolley thumb screw should be located on the inside of the grill, screw the knurled nut on next, next add the counterweight followed by screw on the black handle. 2) SETTING THE COUNTERWEIGHT, the purpose of the counterweight is to balance the rotation and prevent lopsided movement of the motor.
- Page 22 The cotter pins can be discarded or retained in case the grill is relocated. https://bullbbq.com/bull-support-videos/ Please follow these safety instructions below, we also have a helpful video at...
- Page 23 BURNER INSPECTION AND CLEANING This procedure should be followed at least once a month or when your grill has not been used for an extended period. Performing this task reduces the chance of ‘FLASHBACK’ from occurring. For safety, always follow these steps first: 1) Do not attempt during or right after use.
- Page 24 INSERTING BURNER INTO GRILL CAUTION- ALWAYS TURN OFF GAS SUPPLY PRIOR INSTALLING BURNERS BACK IN GRILL Note, there is no need to use the cotter pin while installing the back into position. It is for shipping purposes only. IMPORTANT NOTE Check the burner to make sure it is properly located after replacing.
- Page 25 GRILL LIGHTING SYSTEM LIGHT BULB REPLACEMENT INSTRUCTIONS Remove screw with a small Phillips screwdriver. Caution: Glass cover may be loose, ensure the cover supported before completely removing the screw. GLASS COVER There is a metal clip that clamps onto the glass cover and snaps into the light housing on the screw end.
- Page 26 Grease will not be able to drip down into the grease collector and a grease fire could occur. It is that you use Bull Grease Tray Liners for ease clean up and maintenance. STAINLESS STEEL CLEANING AND MAINTENANCE Your Grill’s outstanding lustre and durability is attributed to Stainless Steel construction.
- Page 27 REQUIRED INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS THAT MUST BE FOLLOWED PER ANSI Z210.58-CSA 1.6-2019 SECTION 4.24.2a FOR ALL OUTDOOR COOKING GAS APPLIANCES. 1) Installation must conform with local codes or, in the absence of local codes, with either of the following as applicable: •...
-
Page 28: Troubleshooting
TROUBLESHOOTING NEVER SMOKE DURING TROUBLESHOOTING IF GRILL FAILS TO OPERATE PROPERLY Turn off gas at source, turn control knobs to “OFF,” and wait five minutes before trying again. Check gas supply/connections. Repeat lighting procedure. If Grill still fails to operate properly, TURN “OFF” GAS AT SOURCE, TURN CONTROL KNOBS TO “OFF,”... - Page 29 (“we”) extend this limited warranty only to the consumer who originally purchased the product (“you”) at BULL OUTDOOR PRODUCTS, INC. located at address 1101 East Pine St. Lodi, CA. 95240 the original site of delivery or installation. It does not extend to any subsequent owner or other transferee of the product.
- Page 30 Warranty Policy (Continued) Grilling/Pizza Accessories and Grill Covers DO NOT include a warranty period. Grill Warranty Periods • The following parts are covered for 1 year on all our current gas grill models: The lid, control panel, grease tray, bezels, knobs, temperature gauge, valves, regulator, flex tubes, rotisserie burner, transformer, and all components of the lighting system.
-
Page 31: What Does This Warranty Not Cover
• We will not pay for any accessory products or ancillary products purchased by you for use in connection with the product. HOW DO YOU NOTIFY BULL CUSTOMER SERVICE OF A POTENTIAL WARRANTY ISSUE? Our Customer Service is ready to help. Here’s how to reach us: By Phone (800) 521-2855 Monday through Friday from 8:00 a.m.
Need help?
Do you have a question about the BRAHMA 57568 LP and is the answer not in the manual?
Questions and answers