Philips HQ8170 User Manual page 12

ENGLISH
14
C
C
C
C
C
1 Remove the powerplug from the wall
socket and pull the appliance plug out of
the shaver.
2 Let the shaver run until it stops and undo
the two screws at the back of the shaver.
3 Undo the two screws in the hair chamber.
4 Undo the three screws in the power unit.
5 Bend the 4 hooks aside (1) to take out the
power unit (2).
Be careful, the hooks are very sharp.
6 Remove the power unit cover by means of
a screwdriver.
7 Remove the battery.
Be careful, the battery strips are very sharp.
Do not connect the shaver to the mains again
after the battery has been removed.