LOGICDATA LOGICflex F1 Original Instructions Manual page 9

EN
MAINTENANCE AND CLEANING
INFORMATION
MAINTENANCE
These maintenance instructions are intended for both
professional cleaners and end users of the height-adjus-
table table. Do not use any aggressive substances such as
gasoline, acetone, turpentine, petrol, or any solvents or
abrasive cleansers.
SERVICE
We advise you to contact your supplier when moving offices
or reconfiguring the workstation.
CLEANING METAL PARTS
The cleaning of colored metal components should be
performed utilizing a soft, non-abrasive cloth and may re-
quire dampening with water to effectively remove surface
contaminants. For more persistent stains, such as those
caused by adhesives, felt tip markers, and ballpoint pens,
a solution of lukewarm water and mild detergent should be
employed. In instances where further cleaning is required,
the use of methylated spirits may be necessary to fully
remove the stains.
RECYCLING
Dispose of all components separately from household was-
te. Use designated collection points or disposal companies
authorized for this purpose.
9