Setting
Server IP
•
Address or
Host Name
*1
•
Port No.
•
Login ID
•
*2
Password
•
*2
Login Timing •
Upload File
•
Name
*1
Overwrite
•
Setting
Data
•
Transfer
Method
But [Space], ["], ['], [&], [<] and [>] are not available.
*1
But ["] is not available.
*2
If you set the FTP server IP address, set 4 digits (0—255) and
3 periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
You can set IPv6 address.
Enter a number (1—65535). Usually set to 21.
If your ISP requires a login ID, set it (0—63 characters).
If your ISP requires a password, set it (0—63 characters).
Select the login timing to an FTP server. If you set [One Time]
during 1-minute transfer, this product logs in to the server only
once, and can reduce the time to log in or log out.
Set the file name to save on an FTP server. Enter 1—234
characters. Entering "\" creates directories for a file. (E.g.
NetworkCamera\image.jpg)
Selecting [Overwrite File] saves and overwrites the image on
the server. Selecting [Save as New File with Time Stamp]
saves the image attaching time stamps on the file name, and
the images are not overwritten.
(E.g. image20050101093020500.jpg) Underlined numbers
are "9h30min20s500ms on January 1, 2005". The letter "s" is
inserted after the day when referring to a summer time zone.
Select [Passive Mode] normally. If FTP does not work, select
[Active Mode] and check the operation.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
97