Table of Contents
Advertisement
•
To reduce the data traffic, the video can be automatically changed to
refreshing still images on the General User page (see page 78).
•
To display the Single Camera page directly, add it to the [Favorites] on the
web browser.
•
When the IP address was changed for this product, enter it on the address
bar.
•
Video may not be displayed quickly or audio may not be listened
immediately. Wait for a while.
•
If you use a proxy server, set the web browser not to access the proxy
server (see page 159).
•
When the image cannot be displayed, a gray screen appears. Clicking
[Refresh] on the web browser displays an error message.
Error Message
Copy guard signals
are detected.
There is no signals. Wait for a moment, and press the Refresh button on your
It is outside the
operation time.
Accesses are
exceeding limit.
A copyguard signal was detected. This image cannot be
displayed. Wait for a moment, and press the Refresh button on
your browser. If the situation does not improve, consult your
administrator.
browser. If the situation does not improve, consult your
administrator.
Images cannot be displayed outside the Operation Time.
Consult your administrator about Operation Time.
When [Motion] is selected for Refresh Interval, this product
allows up to 30 simultaneous accesses. When trying more than
30 accesses, the 31st user will see a gray screen. (Maximum
30 accesses for a Buffered Image page too.) Wait for a
moment, and press the Refresh button on your browser, or
switch to still images.
[For assistance, please call: 1-800-272-7033]
Cause and Remedy
Operating Instructions
An error message
is displayed.
17
Advertisement
Table of Contents
