Table of Contents
Advertisement
3.1.5
Updating this Product Firmware
The Update Firmware page allows you to update the firmware. If the new firmware
is available, install it into this product.
Notes
•
Do not turn off the power during firmware update.
•
The version number can be seen on the Top page or the Status page.
•
All buffered images and alarm logs on the internal memory will be deleted
after the firmware update. The buffered images on the SD memory card
are not deleted.
1.
Download the new firmware on the Panasonic support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/, and save it on your PC.
2.
Click [Update Firmware] on the Maintenance page.
3.
Click [Update Firmware].
•
This product restarts.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
135
Advertisement
Table of Contents
