Table of Contents
Advertisement
Operating Instructions
2.16 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows
down.
1.
Click [Trigger] on the Setup page.
2.
Click No. to enable buffer/transfer.
3.
Check [Enable Image Buffer/Transfer], and select [Timer] for trigger, and click
[Next>].
Notes
•
If you click [Save], all buffered images on the SD memory card are
deleted.
•
Click [Delete Buffered Images] to delete the buffered images.
•
Click [Save] to save the settings.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
82
Advertisement
Table of Contents
