Table of Contents
Advertisement
Operating Instructions
1.2
Accessing this Product
1.
Start up the web browser on your PC.
2.
Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
•
When port number is 80 (default), you do not need to enter port number.
See page 39 for details about port number.
•
For IPv6 connection, see page 14 and page 15, and prepare the
requirements. Enter the "http://(IPv6-registered URL):Port Number" on
the address bar.
•
If the image is not displayed, see page 7 to page 12 of the Troubleshooting
on the Setup CD-ROM.
E.g. http://192.168.0.253:50000 (in IPv4)
3.
The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page (see page 74), authentication window will not be displayed.
4.
Click the following tabs to display each page.
A
A To Single Camera page (page 16)
C To Buffered Image page (page 29)
E To Maintenance page (page 132)
G To log in to this product (page 77)
12
http://
.viewnetcam.com:50000 (in IPv6)
B
C
Version Number
D
E
F
Displays IPv4, IPv6
or IPsec connection.
B To Multi-Camera page (page 27)
D To Setup page (page 34)
F To Support page (page 141)
G
Select a language.
Advertisement
Table of Contents
