Set Search Conditions For Each Section Of The Route - Panasonic Strada CN-NVD905U Operating Instructions Manual

Set search conditions for each section of the route

Search conditions ([Quick1]/[Quick2]/[Short]) can be set
for each section.
1 Select [Route] on the current
position screen.
 The Re-route search screen is displayed.
2 Select [Route].

The Change Route screen is displayed.
3 Select [Search condition].
 The Search Condition screen is displayed.
4 Select the search conditions for each
section.
 Select search conditions from [Quick 1]/
[Quick 2]/[Short].

If there are transit destinations, only [Quick] and
[Short] will be displayed for sections after the
fi rst transit destination.
[Quick]: The search looks for a route with the

shortest travel time. (Recommended
route)
[Short]: The search looks for a route with the

shortest distance to the destination.
5 Select [OK].

The All route screen is displayed after the search
is complete.
6 Select [Start].
 Route guidance starts.
57
57