Panasonic Strada CN-NVD905U Operating Instructions Manual page 53

 Add on the Map mode screen
1 Move the cursor to the intended
destination and select [Enter  ].
 Make the setting on a map of 0.5 mile (500 m*)
or more detailed scale.
* This is the scale when "km" is set as the
distance setting (
 ].
2 Select [Add to
 The All route screen is displayed after the search
is complete.
Select [New  ] to delete all currently set

destinations and set new destinations.
3 Select [Start].

Route guidance starts.
Note:
 The destination set by the one-touch method is set as
" " (the fi rst destination).

To change the order of destinations, refer to "Change
the order of destinations" on page 54.
page 84).
 Add from the Destination menu
1 Search for the destination to add
from the Destination menu (All).
 Refer to pages 40 – 49 for the search method.
 ].
2 Select [Add to
Select [New  ] to delete all currently set

destinations and set new destinations.
3 Select [Add] for the section to add.
 The All route screen is displayed after the search
is complete.
4 Select [Start].
 Route guidance starts.
53
53