Display Poi Icons - Panasonic Strada CN-NVD905U Operating Instructions Manual

Search for a destination

Display POI icons

POI icons for frequently used POIs (Gas stations,
restaurants, etc.) can be displayed on the map. Detailed
information can also be shown for the displayed POI
icons. (Scale: 150 ft – 0.5 mile (50 m – 1 km*))
* This is the scale when "km" is set as the distance
setting ( page 84).
1 Select [Map view] on the current
position screen.
 The Change map view screen is displayed.
2 Select [Display POI icons].
 The Display POI Icons screen is displayed.
3 Select POI icons from the list and
select [OK].
 Selected POI icons are displayed on the map.
 Up to 5 icons can be selected. Selected POI
icons are displayed at the upper left.

Selected POI icons can be cancelled by selecting
them again.
 Select [Delete] to cancel all selected POI icons.
 The icons for displayed POIs can be changed.
Refer to page 84 for the change method.
To select other POI icons, select [Other POIs]

Go to step 4
4 Select a main category.
50
 Select [List all categories] to display the
sub-categories within all main categories.
50
(continued)
5 Select POI icons displayed from the
list and select [OK].
 Selected POI icons are displayed on the map.
 Up to 5 icons can be selected.

To choose another category, select [More], then
repeat from step 4.
 To see information on POI icons
1 Put the cursor on POI icons, which
will cause the cursor to fl ash.

The POI name is displayed.
2 Select [Info.].
 POI information is displayed.
Select [Enter  ] to set it as the destination. If a

destination has already been set, [Add to  ] or
[New  ] is displayed. Refer to page 37 for details.
 [Mark]: Registers the point at the center of the
map as a Contact (Address Book).
Note:
 POI name display is automatically removed after it has
been displayed for approximately 6 seconds.
 If multiple POIs exist for the same building, the POI icons
may overlap on the map. In that case, the POI names are
displayed sequentially as their POI icons are selected.

Departments and sections within the same POI may,
in some cases, be displayed as individual POI icons.