Turn On The Power - Panasonic Strada CN-NVD905U Operating Instructions Manual

Turn on the power

1
Start the engine. (Or turn the key to ACC.)
 Turn on the navigation system power. (It takes a few seconds for the screen to
appear.)
After moving this unit to a different vehicle, or after changing the battery or disconnecting its cables, the
Input ID Code screen is displayed the next time the system starts.
Generally, it is not necessary to enter the ID code each time when using the unit if it has not been
disconnected from the main power supply (car battery).
Enter the 4-digit ID code.
Note:

In case you forget the ID code, please consult your
nearest Panasonic Servicenter.
2
Read the precautions on the
WARNING screen, then touch
[I agree].
 The current position screen (vehicle position) is
displayed.

Change the language used.
Note:

If is pressed when the audiovisual screen is
displayed, the display switches to current position
screen.
 If ACC is left on for a long period of time without
running the engine, it can run the battery down.
 Do not start driving until the current position screen
is displayed.
The system is preparing to boot up.
18
18
When setting the ID CODE
( page 19)
( page 24)
A C C
O N