Edit Area To Avoid Information - Panasonic Strada CN-NVD905U Operating Instructions Manual

Register a location (Area to avoid)

Edit Area to avoid information

Preparation
 Select the Area to avoid and display the Edit area to
avoid screen. ( page 67)
 Set the name of the Area to avoid
1 Select [Name] on the Edit area to
avoid screen.
2 Enter the name and select [OK].
 The entered text is set as the name.
 The name may have up to 70 characters.
 How to enter text
 Change the position of the Area
to avoid
1 Select [Location] on the Edit area to
avoid screen.
2 Move the cursor to the location to
which you wish to move the Area to
avoid and select [Enter].
 Move the Area to avoid to the center of the cursor.
 Make the setting on a map of 0.5 mile (500 m*)
or more detailed scale.
68
* This is the scale when "km" is set as the
distance setting
68
( page 97)
( page 84).
 Change the size of the Area to
avoid
1 Select [Change area size] on the Edit
area to avoid screen.
2 Select or
size.
3 Select [Enter].
 If the destination is set, route searching is
performed.
(continued)
to select the area