Set-Up: User Settings - Panasonic CQ-VD7200U Operating Instructions Manual

SET-UP: User Settings

E
N
G
L
I
S
H
29
CQ-VD7200U
IN-DASH 7 INCH WIDE COLOR LCD TV / DVD - VIDEO / RECEIVER
DISC
VOLUME NAVIGATION ASPECT
TRACK/
ENTER ENTER
MUTE MENU MENU MODE MODE NAVI ASP CHANNEL
P·MODE
POWER
[}] [{] []] [[]
[MENU] [MODE]
(Select)
(End)
[ENTER]
Monitor Position
TILT (Tilting angle adjustment)
Default: 3
Setting range: 1 to 5
SLIDE (Front-rear position)
Default: Front
Setting range: Front, Rear
Navigation Set Up
NAVI INPUT (Navigation input)
Selection of the terminal that connects to the
car navigation system allows you to switch to
images and sounds of the car navigation sys-
tem by pressing [NAVI] (NAVIGATION).
Default: RGB
NAVI VOLUME (Navigation volume)
Volume adjustment of the car navigation sys-
tem is executed.
Default: 4
NAVI MUTE (Navigation mute level)
Select the mute level of this unit during the
voice guidance from the Panasonic car naviga-
tion system (available in future).
Preparation: Connect the navi mute lead.
Note: You can set the navigation mute level
when "RGB" is selected on navigation input.
Default: –10 dB
38
CQ-VD7200U
1 2
Menu Submenu
q Press [MENU] to
q Press [}] or [{] to
display the menu.
select " TILT/SLIDE " .
w Press [[] or []] to w Press [ENTER] to set.
select "USER".
TILT/SLIDE
USER
SCREEN
DVD
DATE
CAPTURE
q Press [}] or [{] to
select " NAVI SETUP " .
AUDIO
w Press [ENTER] to set.
NAVI SETUP
[MODE]
(End)
[MENU]
[}] [{]
[] ] [[ ]
(Select)
[ENTER]
3
Setting
TILT
Press [{] or [}] to select the setting.
1 2
SLIDE
Press []] or [[] to select the setting.
FRONT
Notes:
¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.
¡Front-rear position "REAR" and tilt angle "5" cannot be selected at the same time.
¡The monitor position setting menu can also be displayed by pressing the [TILT] button on the display unit for more
than 1 second. (a page 19)
NAVI INPUT
RGB
VTR1
VTR2
Note: Make sure to select "RGB" when no car navigation is connected.
q Press [}] or [{] to select
an item.
w Press [[] or []] to select
NAVI VOLUME
the setting.
e Press [ENTER] to set. : the sound that a car navigation system generates does not come out.
0
1 2
Low
NAVI MUTE (dB)
0 : unchanged
–10 : decrease 10 dB
Notes:
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
[{]
Tilting angle adjustment
3 4 5
Front
Front-rear position []]
REAR
Navigation input
: connected to the RGB input cord, or a car navigation system
not connected
: connected to the VTR1-IN
: connected to the VTR2-IN
Navigation volume
: volume level
3 4 5
High
Navigation mute level
–20 : decrease 20 dB
∞
: no sound
–
CQ-VD7200U
E
N
G
L
I
S
H
30
[}]
Rear
[[]
39