Change Time Display; Suspend Route Guidance; Resume Route Guidance - Panasonic Strada CN-NVD905U Operating Instructions Manual

Change time display

Switches the display of time to destination between
estimated arrival time and remaining time.
Select .
 Touch [Arrival time] ([Re-maining time]) to
switch the display to estimated arrival time
(remaining time).
 Touch [] to return to the previous display.
 If a transit destination has been set
 If there is a transit destination
distance and the estimated arrival times and
remaining times for each destination are listed. Touch
a destination on the list to display the distance and
time (estimated arrival time or remaining time) for that
destination.

Touch [] to return to the previous display.
( page 52), the

Suspend route guidance

If guidance for the set route is not required, route
guidance can be suspended. This is a convenient
function for driving on smaller roads or in well-known
areas.
1 Select [Setup] from the Navigation
menu during route guidance.
 The Setup menu is displayed.
2 Select [Suspend guidance].
 Suspends route display and voice guidance.

The set destination is not cancelled.
Note:

To suspend voice guidance but leave the route
displayed, set "Auto voice guidance" to [Off].
( page 84)
 Resume route guidance
While route guidance is suspended,
Select [Resume guidance] from the

Setup menu.
(
 Route display and voice guidance resume.
above)
39
39