Edit The Contact Information - Panasonic Strada CN-NVD905U Operating Instructions Manual

Register a location (Contact)

Edit the Contact information

Preparation
 Select the Contact and display the Edit Contacts
screen. ( page 63)
 Change an icon
1 Select [Icon] on the Edit Contacts
screen.
2 Select an icon.
 The selected icon is displayed on the map for the
Contact.
 Select [Page 1]/[Page 2]/[With sound] to change
the list. Select [With sound] to make a sound
when the vehicle approaches a Contact.
 If the icon was selected from the [With
sound] list

Select
made as the vehicle approaches the Contact.

Select [Direction guidance bell] to sound a
bell only when the point is approached from
the desired direction.
 Use [ ] or [ ] to adjust the direction from
which to make the sound on approach.
 Select [Enter].
[Direction guidance bell] setting is

complete.
Note:

Select [No icon] from [Page 2] to avoid displaying an
icon on the Contact.
64
64
to check the sound that will be
(continued)
 Set a Contact for home
Only one Contact can be set as home.
Select [Set Home] on the Edit
Contacts screen.
 A Contact is set for home.
 When [Del. Home] is selected, the home setting
is cancelled.

If another Contact has already been registered
as home, select [Yes] to cancel the old home
setting and change to the new home setting.
 Set the name of a Contact
1 Select [Name] on the Edit Contacts
screen.
2 Enter the name and select [OK].
 The entered text is set as the name.

The name may have up to 70 characters.
 How to enter text (
 Set whether or not to display a
name on the map
Select [On]/[Off] under "Show name".

[On]: Displays the name of the Contact on the map.
 [Off]: Does not display the name of the Contact on
the map.
page 97)