Installation Setting; Gps Information - Panasonic Strada CN-NVD905U Operating Instructions Manual

Installation setting

Set the state of mounting and wiring.
 Refer to the Installation Instructions for details.
1 Select [Install. Setting] from the
Information menu.

The Install. Setting screen is displayed.
2 Make settings.

Speed Signal:
Set the speed signal detection level. (It should
be set to [Normal] in normal circumstances.)
Select [Low Level] if the voltage of the speed
signal is low and the signal cannot be detected.
 Rear View Camera:
Set whether or not to switch to the
image from the rear view camera when
the shift lever is in the reverse position.
( System Upgrade Guidebook)
[On]: Set this if a rear view camera is
connected.
[Off]: Set this if no rear view camera is
connected.
Note:
 The image from the rear view camera may be
blurred in the night or a dark place.

H/F Speaker:
Set the speakers to use for audio output of
hands-free conversation if a hands-free kit
featuring Bluetooth
®
option) is connected.
[Both]: Front Left/Right speaker
[Lch]: Front Left speaker
[Rch]: Front Right speaker
default: [Normal]
default: [Off]
technology (CY-BT100U,
default: [Both]

GPS information

Check GPS information reception.
1 Select [GPS Info] from the
Information menu.
 The GPS Info screen is displayed.
2 Check the reception.
 Use a clearly visible point to check reception.

Check that at least three satellite numbers
are being received, and that the latitude and
longitude are displayed.
Note:
 If GPS reception is not continuous, check connections
to the GPS antenna, and its mounting position.
23
23