User Settings; Clock Setting - Panasonic CQ-VA7300N Operating Instructions Manual

User Settings

E
N
G
L
I
S
H
21
ASPECT
ASP CQ-VA7300N TILT OPEN / CLOSE
CQ-VA7300N
PRESET / DISC
EON PTY CT IN-DASH 7 INCH COLOR LCD MONITOR WITH RECEIVER
TRACK
TUNE
VOL VOL VOL MUTE MUTE MUTE
NAVIGATION PTY MONO/ST POWER
LOUD
NAVI DISP TA AF MODE MODE MENU MENU ENTER ENTER
[}] [{]
[] ] [[ ]
[MODE]
(Select/adjust)
(End)
[ENTER]
[MENU]
Display Unit
TILT (Tilting angle adjustment)
Default: 5
Setting range: 1 to 5
OPEN/CLOSE
Automatic monitor OPEN/CLOSE in accordance
with ACC ignition switch ON/OFF
Default: MANUAL

Clock Setting

Default: DISPLAY...OFF
CLOCK MODE...RDS
ADJUST...0/H, 00/M
Notes:
¡The clock starts after the unit returns to the
regular mode by pressing [MODE].
¡The 24-hour clock system is adopted.
22
CQ-VA7300N
1 2
Menu Submenu
q Press [}] or [{] to
select " DISPLAY UNIT " .
q Press [MENU] to w Press [ENTER] to set.
display the menu.
DISPLAY UNIT
w Press [[] or []] to
select "USER".
USER
SOUND
SCREEN
RDS
Note: The menu RDS can
q Press [}] or [{] to
not be selected in the
select " CLOCK " .
modes other than FM
w Press [ENTER] to set.
mode.
CLOCK
[MODE] (End)
*Making selection and adjustment on the Menu.
[MENU]
[}] [{]
[] ] [[ ]
(Select/adjust)
1
[ENTER]
¡Press [MODE] (End) to close the main menu and the setting/adjusting
menu.
¡Press [MENU] in the setting/adjusting menu to return to the main
3
Setting
menu mode.
TILT
Press []] or [[] to select the setting.
1 2
OPEN/CLOSE
*Make a selection.
MANUAL
AUTO
Notes:
¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.
¡The monitor position setting menu can also be displayed by pressing the [TILT] button on the display unit for more
than 1 second. (a page 11)
DISPLAY
ON
OFF
CLOCK MODE
*Make selection and adjustment.
RDS
MANUAL
ADJUST
0/H
00/M
Notes:
¡To change numbers rapidly while adjusting cock, hold []] or [[].
¡The clock starts by pressing [MODE] or [MENU] after clock adjustment.
q [}] and [{] buttons move the
cursor vertically.
2
w [[] and []] buttons move the
cursor horizontally.
e To set, press [ENTER] .
Tilting angle adjustment
[]]
3 4 5
Monitor setup
: no interlock between monitor OPEN/CLOSE and ACC
ON/OFF
: interlock between monitor OPEN/CLOSE and ACC ON/OFF
( )
ACC ON
Clock display for the monitor
: clock display ON ([0:00] is displayed before adjusting
the clock.)
: clock display OFF
Clock preference
: The clock is automatically adjusted using the RDS clock time
service function. (a page 14)
: Manually adjusted time is displayed.
Adjusting the clock manually
: Press []] to adjust the hour.
: Press [[] to adjust the minute.
CQ-VA7300N
E
N
G
L
I
S
H
22
[[]
23