Document Is Not Printed Correctly - Panasonic WORKIO DP-130 Operating Instructions Manual

Document is not printed correctly

Problem
Printing position is wrong or print is
misses on the edge.
Characters and symbols not used in
documents are printed.
Printing operation takes excessive
time.
Paper size or printing orientation is different between the application settings and
the printer driver settings. Specify the settings again.
The specified paper has not been loaded on the device.
Specify the settings again or load the appropriate paper.
The document margin is not sufficient. On the machine, a margin of approx. 5 mm
or more is required at the sheet edge.
(Recommended printing margin) Adjust the margin correctly.
Verify that your machine has been selected as the printer driver.
The wait time for printing operations depends on the spool settings.
Select Spool print jobs so program finishes printing faster in spool settings.
• Reference :
Windows 98/Me [Details Tab]
Windows NT 4.0 [Scheduling Tab]
Windows 2000/XP [Advanced Tab]
Troubleshooting
Action
(See page 32)
(See page 43)
(See page 58)
173