Panasonic WORKIO DP-130 Operating Instructions Manual page 33

Windows 98/Me
8. button
Spool Settings...
Specify the method of sending (spool) documents from the program to the printer.
• Spool Data Type
Select spool data type (EMF format or RAW format). Specifying RAW format results in longer time
before placing an application operational after printing on the application.
Note: Spooling by EMF format (metafile compression) may cause the following problems on some
application software.
1) Printing result is different from the screen display.
2) Printing requires excessive time.
• Enable bidirectional support
Be sure to check the check box for "Enable bidirectional support" when installing the status monitor
(See page 126). Otherwise, printing may not function properly.
9. button
Port Settings...
Modifies printer port settings.
Configuring the Printer Driver Settings
33