Document Is Not Printed Correctly - Panasonic WORKIO DP-1810 Operating Instructions Manual

Troubleshooting

Document is not printed correctly

Problem
Character is not printing in the
correct positions or the characters
near the edges of the page are
missing.
The font type is wrong.
The character is not smooth.
Fine line print cannot be obtained.
Poor photograph print quality.
Different character or symbol from
the document is printed.
Printing is exceedingly slow.
70
• Check and specify the paper size and orientation settings in the printer driver to
coincide with the application.
• Check if the specified paper is loaded in the device.
• Increase the Page Margins in the application. The device requires minimum
margins of ¼ inches (4 mm) on all sides.
• Check if the selected font is installed in the PC.
• Check if the selected font is being replaced with a proper printer font in the Font
Substitution Table of the Printer Driver Properties dialog box.
• Select "Always use TrueType fonts" from the Font tab of the Printer Driver
Properties dialog box.
• Select an outline font instead of a bit map font.
• Select 600 dpi resolution.
• Select 600 dpi resolution.
• Check if the proper printer driver is selected.
• Select the Spool settings "Start printing after first page is spooled" from the
Details tab of the Printer Driver Properties dialog box.
• Select 300 dpi resolution.
Action