Panasonic WORKIO DP-130 Operating Instructions Manual page 36

Configuring the Printer Driver Settings
Windows 98/Me
Handling Tab
1. Sorter
Select whether to Stack or Sort when printing multiple copies.
2. Printing on both sides (Duplex) (For DP-150FX/2000/2010E/2500/3000)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and
2) Check [Duplex Unit] check box in Device Options Tab.
3. Flipping Direction
Select binding side (Long Edge/Short Edge) for duplex printing.
4. Binding Margin (For DP-2000/2010E/2500/3000)
Select the binding margin upon duplex printing.
The width of the binding margin is specified on the main unit.
5. Output Tray (For DP-2000/2500/3000)
Specify the output destination (Auto Selection, Inner Tray 1, Inner Tray 2 or Outer Tray).
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
2) Check [Inner Tray], [Finisher / Outer Tray] check boxes in Device Options Tab.
36
Automatic Duplex Unit (DA-FK200/FK210/MD200) are mounted.
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.