Advanced Tab - Panasonic WORKIO DP-130 Operating Instructions Manual

Configuring the Printer Driver Settings
Windows NT 4.0 (User)

Advanced Tab

1. Paper Size
Select a document size.
2. Orientation
Select the print orientation (Portrait/Landscape).
3. Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
4. Copy Count
Specify the number of copies to be printed. If the number of copies to be printed can be specified within
the application, indicate one copy here and specify the number of copies in the Print dialog box of the
application.
5. Print on Both Sides (Duplex Printing) (For DP-150FX/2000/2010E/2500/3000)
Specify if duplex printing is performed.
6. Resolution
Select the printer resolution (300dpi/600dpi).
7. Scaling
Specify custom zoom when printing a document by zooming in/out at a desired rate. If the zooming rate is
specifiable in an application, specify "100%" (same size) here. Specify a zooming rate in the print dialog
box of the application.
NOTE
50
1. Settings specified in this section are valid until an application is shut down.