Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 69

Quick Boot Manager
Windows 7
Quick Boot Manager reduces the wait time between the time you turn on the computer and the time Windows launches.
Two methods are available for quick booting, "Easy quick boot mode" and "Detailed quick boot wizard".
NOTE
To enable fast booting after the computer is turned on, set [Boot Mode] to [Fast] in the [Boot] menu of the Setup Utility.
You can also use Quick Boot Manager to set the [Boot Mode] to [Fast]. If all settings are cleared using Quick Boot
Manager, the [Boot Mode] will be set to [Normal].
When [Fast] mode is enabled, the [Panasonic] boot screen will not appear immediately after the computer is turned
on. To start the Setup Utility, press and hold F2 or Del while turning the computer on. Hold down F2 or Del until the
Setup Utility screen appears.
Launching Quick Boot Manager
Set the Supervisor Password before setting the User Password.
1
Log on to Windows as an administrator.
2
Click (Start) - [All Programs] - [Panasonic] - [Quick Boot Manager].
3
If the User Account Control screen appears, click [Yes].
Quick Boot Manager Settings
Setting item
Initialization (Boot Mode) setting
<Detailed quick boot wizard only>
Delay launch of devices/services (Only for
models with Flash Memory Drive)
<Detailed quick boot wizard only>
Adjust restore point
(Only for models with Flash Memory Drive)
Allows you to set the [Boot Mode] to [Fast] in the [Boot] menu of the Setup
Utility, and reduce the time until the Widows startup screen appears by
bypassing the [Panasonic] boot screen that appears immediately after the
computer is turned on.
Allows you to reduce the Windows startup time by initializing wired LAN,
wireless LAN, unused PCI Express root ports, and preinstalled services after
you log on to Windows.
Allows you to reduce the Windows startup time by deleting restore points and
inhibiting their creation.
Description
69