Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 105

External Display
NOTE
<CF-C1 Series with Port Replicator Connector>
When an external display is connected to an optional port replicator, the display switching may work differently. For
further information, refer to the instruction manual of the port replicator.
After resuming from
destination may not be the same as the one selected in the previous status.
When you change the display after Windows starts up, do not press any key until switching is complete.
Display switching by pressing
Fast User Switching function to switch the user. In this case, log off all users and restart the computer.
Do not connect or remove the external display during
It may take some time to switch between displays depending on the displays used.
®
Use the [Intel Graphics and Media Control Panel] screen to set the color depth, resolution and refresh rate.
When you change the output destination after Windows starts up, do not press any key until switching is complete.
You cannot use the simultaneous display until Windows starts up.
Simultaneous display and display switching do not work when [Command Prompt] screen is set to "Full
Windows XP
Screen".
When you use the external display only, set the suitable number of colors, resolution, or refresh rate separately from
when you use the internal LCD only or when you use the simultaneous display.
Depending on the settings, some external displays may be distorted or may not display the mouse cursor correctly. In
this case, set the settings to lower value.
When you use the simultaneous display, DVD-Video, MPEG files and other motion image files may not be played back
smoothly.
Carefully read the instruction manual of the external display.
When connecting an external display that does not conform to the Plug & Play standards, select the display driver
accordingly in the following menu, or use the driver disc supplied with the monitor.
Click
Windows 7
A
A standard user needs to enter an administrator password.
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Monitor] -
Windows XP
[Properties].
Click [Driver] - [Update Driver].
B
If a picture is not displayed normally, lower the level of [Hardware acceleration] in the following menu.
Windows XP
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Troubleshoot]
When an external display is connected to an optional port replicator, the display switching may work differently form
the above. For further information, refer to the instruction manual of the port replicator.
<CF-S10 Series>
If the HDMI display does not support connection to a personal computer, the screen may appear blurry, or the output
destination may not be changed by pressing
sleep/
Windows 7
Windows XP
+ P or Fn + F3 /
Windows 7
(Start) - [Control Panel] - [Adjust screen resolution] - [Advanced Settings] - [Monitor] - [Properties].
standby or hibernation, or restarting the computer, the output
Windows XP
sleep /
Windows 7
Windows XP
+ P or Fn + P.
105
Fn + F3 may not work when you use the
standby or hibernation.