Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 64

Sleep/Standby or Hibernation Functions
To resume from sleep/standby or hibernation
1
Open the display, or slide the power switch (A).
<CF-C1 Series>
Windows 7
In the default setting, the Windows password will be requested to resume.
Windows XP
When [Stand by] or [Hibernate] is selected as the setting for [When I close the lid of my portable computer]
(Setting Sleep or Hibernation), you can resume operation opening the display.
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
15 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the keyboard (except for password input), Touch Pad, screen, tablet buttons (only for CF-C1 Series), or power
switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Close or open the display.
• Shut down or restart Windows.
• Enter sleep /
Windows 7
• <CF-S10 Series>
Operate the drive power/open switch.
• Operate the wireless switch.
• Insert and remove the SD Memory Card.
Windows 7 If the computer enters sleep while a USB keyboard or mouse is connected, touching the USB keyboard
keys or mouse will resume the computer.
<CF-S10 Series>
standby or hibernation (Wait approximately one minute).
Windows XP
64