Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 190

Troubleshooting (Advanced)
An error occurs while installing the driver
Check that the driver is supported by the operating system. If you use an incompatible driver, malfunction may occur.
Set the [Execute-Disable Bit Capability] to [Disabled] in the [Advanced] menu of the Setup Utility. If the error is not
resolved, it is possible that the driver being used is not compatible with the Data execution prevention function. For a
driver, consult the peripheral manufacturer.
The device will not operate properly if a different mouse driver is installed
When you install a different mouse driver, such as IntelliPoint for Microsoft's IntelliMouse, the mouse driver currently
installed in the computer may need to be uninstalled.
If not using the Touch Pad, and using an external mouse only, set [Touch Pad] to [Disabled] in the [Main] menu of the
Setup Utility. ( page
A PC Card does not work
Confirm that the card conforms to the PC Card Standard.
Make sure the card is properly inserted (
Check that the proper port settings have been made.
Windows 7
A
Click (Start) - [Computer] - [System properties] - [Device Manager].
Windows XP
Click [Start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
Double-click [PCMCIA adapters], and double-click the relevant device.
B
In [Resources], if [Conflicting device list] shows [No conflicts], there is no conflict.
Read the instructions supplied with the PC Card, or consult the PC Card manufacturer.
Check that you are using a driver supported by the operating system.
You do not know the available RAM module
Refer to "Expanding Memory" (
Microsoft Windows Logo Authentication is not obtained
If "This driver is not digitally signed!" message is displayed, the driver you attempt to install may not have obtained
Microsoft Windows Logo Authentication. Consult the peripheral manufacturer.
161) And uninstall the mouse driver that is installed on this computer.
page
page 97).
92).
190