Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 205

Recovery Disc Creation Utility
11
When [Recovery disc #1 complete.] is displayed, remove the disc and write contents of
the disc on the label side.
Do not use sharp objects that may leave a mark.
12
Click [OK].
Following on-screen instructions, remove or replace the disc.
13
Click [OK] on [All recovery discs complete.] screen.
NOTE
The disc created with this utility is only for this computer. You cannot use for others.
Two or more users cannot use this utility with Windows Fast User Switching function.
Additional applications cannot be recovered even if you use a recovery disc created with this utility.
If you interrupted creating a recovery disc, a message of failure may appear in step
create a new recovery disc again.
You cannot successively create some recovery discs with this utility. If, however, the hard disc recovery is executed or
OS is reinstalled from the created recovery disc, you can create a recovery disc again.
If you fail to create a recovery disc or a error message appears, try either of the following procedures.
• Insert the disc correctly.
• Check the disc condition.
• Restart the computer and try to create a recovery disc again.
• Contact your technical support office.
When you reinstall OS using the recovery disc, OS which was selected at step
32-bit to 64-bit, or vice versa, reinstall OS using the recovery partition in the hard disk. (OPERATING INSTRUCTIONS
"Reinstalling Software")
205
10
screen above. In this case,
6
will be installed. To change OS from